You can run more then 7LED'ss per side on the door wire.

But that is not the problem for you, Your car does not have a wire from the BCM to connector x208

If you can hold on i will have the wire to add that, and more.

I know I dont have the connector, what I want to do is draw power off of the Harness you sent me. What I would do is run the Door Panels through the car over to this harness.

I can build a couple Y connectors and Run the wire. I just need to know if I can run the 5 LED's and the Guage pack off of the Guage packs power supply without running into electrical issues. I want to make this as plug and play as possible.

Yes you can but what i was trying to say is, its one wire that is missing between two connecters and your door's ABL will work

What wire is that?

There is a wire that is not there coming out of the BCM and going to X208 connecter that is all that is missing to power your door ABL.

Working on getting the terminals to make the wire.

Does this require and soldering or splicing?

No, if it all works out all you will do is take the battery power off, then the two connecters and push the wire in the the BCM connecter on one end then into the X208 connecter on the outer side, and put it back together and it will work.

For the ABL in the doors we found that that is the only wire missing for it to work.

The power to the door locks has to plug into a harness somewhere within the door, correct? Is it possible instead of T-taping there to create a Y splitter within the door?

I havent opened up the panels yet so I am not quite sure what the BCM or X208 connectors are that you are referring to. Trying to visualize it I am getting lost.

The door lock lead is 12v constant so your led would be on at all times, even with the ignition in "off"...

Sorry I meant the window switch that you would T-Tap into.

No you can not power off the door locks, but you can use the the yellow off the window switch for your LED's.

The BCM is the Body Control Module and X208 is a connecter that goes form the IP to the body, and its under the driver side of the car.

any luck on finding more tubes to do the dash with?

Look for info on this by end of next week i will start a thread.

Ofer is just the best, isn't he?? Thanks for everything you do for us Ofer.