Where to wire in ambient footwell lighting?
 

I have a pair of ambient footwell lighting (CCFL). Anyone know where to tap in to 12v to have them go/off with the dome lighting? I want them to come up when I unlock the doors or when the door is open and then go off with the normal dome light.

:popcorn:

Guess we will never know?

Well I don't see why you couldn't tap into on of the interior lamp ckt's.
Heres the schematics of the interior lamps. Wish I knew how to thumbnail this, help me learn if you know :sm0:.
If you need to know a location of a connection or poss wire just ask :chevy:.

Ooh! Finally looks like we may be able to not run a wire to the dome lamp!

Do we know where K9 physically is?

isnt there already something down there for foot well lighting?

yes, a little help finding that sucker would be great! :)

Looks like the BCM (K9) is located to the right of the steering column, above the accelerator pedal.

Just remember that you do this stuff AT YOUR OWN RISK. If something happens it might effect some parts of your warranty ;).

Edit:Location

Ah, poop! LOL

Ok, so what wire is it that we tap into for the light connections?

I'm not sure which wires to tap into or where they are but I am very interested in this thread as I intent to install these as well.

After the edit, that "poop" makes no sense. :laugh:

Oh thanks for schematic

so I think we just connect the alimentation of light with the 156 WH wire in K9 block, and connect ground wires together.

Send a PM to "AACstyle", he has kits and exactly knows how to do this