ls3 ss now 430hp!!!?
I just had and update last night on autobook and this is what changed in the power tain tab
Prepared By: administrator 2010 Retail Chevrolet Camaro 2dr Cpe 2SS 1ET37 TECHNICAL SPECIFICATIONS POWERTRAIN - BASIC SPECIFICATIONS - 2010 Retail 1ET37 2dr Cpe 2SS ENGINE Engine Order Code LS3 Engine Type HO Gas V8 Displacement 6.2L/378 CID SAE Net Horsepower @ RPM 430 @ 5900 SAE Net Torque (lb ft) @ RPM 424 @ 4600 TRANSMISSION Transmission order code MN6 Transmission Type Description 6-Speed Manual Drive Train Rear wheel drive MILEAGE City EPA fuel economy estimate (MPG) - TBD - Hwy EPA fuel economy estimate (MPG) - TBD - City cruising range (mi) - TBD - Hwy cruising range (mi) - TBD - * Indicates equipment which is in addition to or replaces base model's standard equipment. Report content is based on current data version referenced. Any performance-related calculations are offered solely as guidelines. Actual unit performance will depend on your operating conditions. GM AutoBook, Data Version: 144.1, Data updated 11/11/2008 11:29:00 AM ©Copyright 1986-2005 Chrome Systems Corporation. All rights reserved. Customer File: November 13, 2008 9:26:31 AM Page 1Prepared By: administrator 2010 Retail Chevrolet Camaro 2dr Cpe 2SS 1ET37 TECHNICAL SPECIFICATIONS POWERTRAIN - ADVANCED SPECIFICATIONS - 2010 Retail 1ET37 2dr Cpe 2SS TRANSMISSION Gear Ratio (:1) First Gear Ratio (:1) 3.01 Second Gear Ratio (:1) 2.07 Third Gear Ratio (:1) 1.43 Fourth Gear Rato (:1) 1.00 Fifth Gear Ratio (:1) 0.84 Sixth Gear Ratio (:1) 0.57 Reverse Ratio (:1) 3.28 Clutch size (in) - TBD - Final Drive Axle Ratio (:1) 3.45 ELECTRICAL Battery 1 Battery cold cranking Amps @ 0 F - TBD - Alternator Alternator Amps 150.00 COOLING SYSTEM Cooling system capacity - TBD - * Indicates equipment which is in addition to or replaces base model's standard equipment. Report content is based on current data version referenced. Any performance-related calculations are offered solely as guidelines. Actual unit performance will depend on your operating conditions. GM AutoBook, Data Version: 144.1, Data updated 11/11/2008 11:29:00 AM ©Copyright 1986-2005 Chrome Systems Corporation. All rights reserved. Customer File: November 13, 2008 9:26:31 AM Page 2Prepared By: administrator 2010 Retail Chevrolet Camaro 2dr Cpe 2SS 1ET37 TECHNICAL SPECIFICATIONS PAYLOAD/TRAILERING SPECIFICATIONS - 2010 Retail 1ET37 2dr Cpe 2SS WEIGHT INFORMATION Base curb weight (lbs) 3,860.00 TRAILERING Max Trailer Wt. Max Tongue Load Dead Weight Hitch (lbs) Weight Distributing Hitch (lbs) Fifth Wheel Hitch (lbs) * Indicates equipment which is in addition to or replaces base model's standard equipment. Report content is based on current data version referenced. Any performance-related calculations are offered solely as guidelines. Actual unit performance will depend on your operating conditions. GM AutoBook, Data Version: 144.1, Data updated 11/11/2008 11:29:00 AM ©Copyright 1986-2005 Chrome Systems Corporation. All rights reserved. Customer File: November 13, 2008 9:26:31 AM Page 3Prepared By: administrator 2010 Retail Chevrolet Camaro 2dr Cpe 2SS 1ET37 TECHNICAL SPECIFICATIONS CHASSIS SPECIFICATIONS - 2010 Retail 1ET37 2dr Cpe 2SS SUSPENSION Front Rear Suspension Type Multi-Link Strut 4.5-Link Independen Suspension Type (cont.) Double Ball Joint Shock Absorber Diameter (mm) - TBD - - TBD - Stabilizer Bar Diameter (in) - TBD - - TBD - BRAKES Brake type Pwr ABS System 4-wheel Front Rear Disc Yes Yes Rotor Diam x Thickness (in) 14 x 1.26 14.4 x 1.1 Drum Drum Diam x Width (in) TIRES Front Rear Spare Tire Order Code QOO QOO Tire Size P245/45R20 P275/40R20 WHEELS Front Rear Spare Wheel Size 20 x 8 20 x 9 Wheel Type Aluminum Aluminum STEERING Steering type Pwr Ratio (:1) Overall 16.10 Lock-to-Lock Turns 2.50 Turning Diameter Curb-to-Curb 37.70 Wall-to-Wall - TBD - Report content is based on current data version referenced. Any performance-related calculations are offered solely as guidelines. Actual unit performance will depend on your operating conditions. GM AutoBook, Data Version: 144.1, Data updated 11/11/2008 11:29:00 AM ©Copyright 1986-2005 Chrome Systems Corporation. All rights reserved. Customer File: November 13, 2008 9:26:31 AM Page 4Prepared By: administrator 2010 Retail Chevrolet Camaro 2dr Cpe 2SS 1ET37 TECHNICAL SPECIFICATIONS CHASSIS SPECIFICATIONS - 2010 Retail 1ET37 2dr Cpe 2SS FUEL TANK Main Capacity 19.00 * Indicates equipment which is in addition to or replaces base model's standard equipment. Report content is based on current data version referenced. Any performance-related calculations are offered solely as guidelines. Actual unit performance will depend on your operating conditions. GM AutoBook, Data Version: 144.1, Data updated 11/11/2008 11:29:00 AM ©Copyright 1986-2005 Chrome Systems Corporation. All rights reserved. Customer File: November 13, 2008 9:26:31 AM Page 5Prepared By: administrator 2010 Retail Chevrolet Camaro 2dr Cpe 2SS 1ET37 TECHNICAL SPECIFICATIONS DIMENSIONS - 2010 Retail 1ET37 2dr Cpe 2SS EXTERIOR DIMENSIONS Wheelbase (in) 112.30 Length, Overall (in) 190.40 Width, Max w/o mirrors (in) 75.50 Height, Overall (in) 54.20 Tread Width Tread Width, Front 63.7 Tread Width, Rear 63.7 Min Ground Clearance (in) - TBD - CARGO AREA DIMENSIONS Liftover Height (in) - TBD - Trunk Volume 11.3 INTERIOR DIMENSIONS Passenger Capacity 4 Passenger Volume (ft³) - TBD - EPA Classification Compact Seating Position Front Second Head Room (in) 37.40 35.30 Leg Room (in) 42.40 29.90 Shoulder Room (in) 56.90 42.50 Hip Room (in) - TBD - - TBD - * Indicates equipment which is in addition to or replaces base model's standard equipment. Report content is based on current data version referenced. Any performance-related calculations are offered solely as guidelines. Actual unit performance will depend on your operating conditions. GM AutoBook, Data Version: 144.1, Data updated 11/11/2008 11:29:00 AM ©Copyright 1986-2005 Chrome Systems Corporation. All rights reserved. Customer File: " November 13, 2008 9:26:31 AM Page 6" |
So this means that the Camaro SS is getting the same LS3 that the Corvette has? Wow I hope this is true!
|
if that's actually true, it don't surprise me they released lower numbers first to make actual numbers seem that much better.
|
The Corvette LS3's are dynoing around 370 rwhp which translates to 450 crank hp (17% driveline loss). Hopefully we get the same under rated engines.
|
I highly doubt that they would release the same horsepower rating for both the Corvette and Camaro, even if both are underrated. This is either a typo or a mistake.
|
Quote:
|
Quote:
With different intake and exhaust, I don't think it will be rated the same as the vette .. Crowley |
Quote:
... If you think the LS3s are underrated.... why don't you add 10 more HP at least to what Jeremy just said about ZR1 .... ;) |
Quote:
im glad they are doing this, simply means they are using the same tune. also 1_2many, 17% loss is way way high for a corvette drivetrain |
Quote:
Crowley |
I tend to beleive this, you'll find GM underates their hp #'s quite often
|
http://www.youtube.com/watch?v=yfXqlwecTi8
Bone stock C6 Corvette dynoing 392 rwhp. Easy 450 hp at crank. |
Quote:
I can't remember who said it, either Bob Lutz or Ed Peper. Basically they are quoted as saying they have no problems stepping on the corvette where the camaro is concerned. I'll look for the article. Dragon found it for me once... I should have book marked it. Found it Quote:
|
Quote:
|
All times are GMT -5. The time now is 11:01 PM. |
Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.