[1JEWLDSSRS]

Originally Posted by RupertPupkin

Thanks. I disassembled the tensioner and 1 of the idler pulleys and tinkered with it a little. Lo and behold I was able to get it tighter. Hopefully no more shredded belts.

https://youtube.com/shorts/xYkD3Bxau...kOAA3SgBtX_hBJ

Cool. But what is that black pulley in the lower right hand corner of the vid that it only shows half of it! It is still bouncing around quite a bit, and the belt is still moving around a lot, that might be an issue to look at too.