|
This is JohnnyCamaro AKA John Cox from Chevy Accessories. I want to ensure there is accurate info out there for everyone.
1. There is no recall for the Camaro Ground Effects regarding the front splitter
2. There has been an issue regarding these kits due to a dealer installation issue. While some postings are correct that 3M tape is used, and must be cured for 24 hrs before full install, there are also several rivets. There are 16 rivets on an SS and 12 rivets on a base that will hold this in place.
3. It is important to ensure that the dealer installed these rivets and that they did so properly. The dealer has to drill and use rivets into the fascia. When doing this correctly as described in the installation instructions, there are no issues.
A training video and more communication is being done to ensure that the dealer is aware of the issue and installing properly.
Thanks,
JohnnyCamaro
|