04-21-2011, 12:38 AM | #1 |
Drives: 2015 ZO6 3LZ Stage 2 A8 Join Date: Nov 2010
Location: La plata MD
Posts: 2,299
|
17' Welds won't fit if??
So I got a call today from Perry over at PTS. unfortunately I can not buy my welds from him, because I have lowered my car 1", Weld will not warrenty my rims. Weld claims that they will rub and ruin the rear rims. Which could cause a blow out. 120mph blow outWouldnt be pretty. So needless to say I cancelled my order. Hope Perry become a bogart dist. Ill find out tomorrow.
So just and FYI, If you lowered your camaro, forget about 17' welds...:( |
04-21-2011, 08:47 AM | #2 |
|
Yep, this was discovered a few weeks ago. One of the members here (94guy) had the very same issue (after he bought the wheels). I'm not sure if he was ever able to find a resolution or not. But I do know he was in direct contact with Weld Racing, so that's probably why they put that clause in the warranty now. Check out his thread:
http://www.camaro5.com/forums/showthread.php?t=134593 |
04-21-2011, 11:38 AM | #3 |
My 17'' welds were rubbing on the inside of the rim where the weights were and knocked them off. I have the pfadt trailing arms and they hit the wheel so i ground a little off them and raised the rear back up a half inch. Works ok now.
Crummy pic but you can see where i grinded it.
__________________
[SIGPIC][/SIGPIC]Va.Speed built 427 stroker
LS2 Darton sleeved 427 stroker.Callies dragonslayer crankshaft. Callies I beam rods. Wiseco blower pistons. Mast cnc 12 degree big bore ls3 heads-2.2 intake &1.6 ex. 6 bolt 270cc-.750 deck. Lunati link bar lifters.T&D roller rockers.COMP-VA. Speed special cam 605 lift, 238dur. Procharger F1R @15psi. ARH headers with custom 3'' exhaust all the way.Magnaflow mufflers. QTP cutouts.Rossler built 6l80e trans. DSS 1400hp axles. Pfadt suspension.-Coilovers, sway bars,motor mounts,trailing arms. Aeromotive eliminater pump. 907rwhp. |
|
04-21-2011, 02:27 PM | #4 |
Drives: 99 Camaro; 2010 Camaro 2SS/RS Join Date: Nov 2009
Location: louisiana
Posts: 1,965
|
yes my wheels were scuffed pretty good. weld won't do shit about it. i'm going to have a guy that does chassis work notch and box the lower control arm for. Weld sucks
|
04-21-2011, 03:06 PM | #5 |
Mans First Invention
Drives: Killer Join Date: Mar 2011
Location: Kansas
Posts: 15
|
17 Inch Wheels
I don't understand? Why is it a Weld problem that you modified your car so that a pair of their wheels will not fit?
|
04-21-2011, 03:20 PM | #6 |
Edit now 5th Camaro
Drives: 2016 2SS Join Date: Jul 2010
Location: Charlotte NC
Posts: 225
|
LOL aftermarket wheels wont fit a moded car
__________________
1995 V6 First Car - Sold
2000 Z/28 11.12 @ 125mph Sold 2000 SS - Sold 2001 ZO6 - Sold 2010 Camaro SS Sold AEM Intake / 1" Drop / Forgeline / TSP Headers / AMT Catback / 20% Tint Current Whip 2016 2SS Hyper Blue! |
04-21-2011, 03:23 PM | #7 |
|
spacers?
__________________
THE "MENACE"
|
04-21-2011, 03:59 PM | #8 |
Drives: 2011 Camaro Join Date: Jan 2011
Location: Roswell, N.M.
Posts: 439
|
The Weld product is a good product but as discussed they will not guarantee fit on a lowered Camaro. The wheels they offer are for stock vehicles only according to the sales department at Weld. PTS will not sell a set of wheels and then have to tell you grind, chop or whatever to fit a car as my insurance liability would not allow this as well.
Sorry Fellas... Perry PTS |
04-21-2011, 04:02 PM | #9 | |
Drives: Car Join Date: Jun 2010
Location: Place
Posts: 3,361
|
Quote:
Anyone else see the part that might be a problem? BTW -- this isn't directed at you.. it's at the statement from Weld. Last edited by HumanWiki; 04-21-2011 at 04:13 PM. |
|
04-21-2011, 04:04 PM | #10 |
Drives: 99 Camaro; 2010 Camaro 2SS/RS Join Date: Nov 2009
Location: louisiana
Posts: 1,965
|
well weld should have told me that the wheels don't fit a lowered car never once was i told this. the wheels don't rub until you launch the car so i never knew they rubbed until i took them off after 10-15 passes. so why would this not be welds problem? please tell me? also i don't think they knew till a few of us messed up the back of the wheels.
|
04-21-2011, 04:05 PM | #11 |
Drives: 99 Camaro; 2010 Camaro 2SS/RS Join Date: Nov 2009
Location: louisiana
Posts: 1,965
|
human wiki has a great point.
|
04-21-2011, 04:08 PM | #12 |
Drives: 99 Camaro; 2010 Camaro 2SS/RS Join Date: Nov 2009
Location: louisiana
Posts: 1,965
|
wheel czar you work for weld? low post count and your from the same area
|
04-21-2011, 04:11 PM | #13 | |
Drives: 2011 Camaro Join Date: Jan 2011
Location: Roswell, N.M.
Posts: 439
|
Quote:
Oh I agree 100% and the app guide still does not say anything. I would call Weld at 1-800-788-9353 and talk to the Drag Sales department. |
|
04-21-2011, 04:13 PM | #14 |
Drives: Car Join Date: Jun 2010
Location: Place
Posts: 3,361
|
I don't have a set and I'm still at stock height -- but, I find that comment from Weld to be a little interesting..
Vendors all over the place talk about NOT racing on stock axles, stock trailing arms.. How soft the stock IRS mounting points are, etc. and to replace all of that before you track so you don't tear stuff apart.. There are a couple vendors that even sell "track pack" suspension components that include lowering springs and different rates.. I don't really know many people rolling around on 17s for the look.. It's my understanding it's all about traction and tire for the tracks. I know they can't test every part out there.. -- but, seriously.. someone making wheels should be a little more informed on something like lowering a car = screwing up their wheel than waiting for people to ruin them first. |
|
|
Thread Tools | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Coil covers fit that fit the LS3? | full of days | Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons | 10 | 09-24-2010 11:43 AM |
18" Wheels that fit SS | d69chris | Wheels and Tires Talk Sponsored by The Tire Rack | 0 | 03-04-2010 02:58 PM |
What wheels will fit on the 2SS | SSponte | Wheels and Tires Talk Sponsored by The Tire Rack | 3 | 02-11-2010 03:34 PM |
10% off custom fit heated seat kits (4 to choose from) @ PFYC.com | Redshift | Interior Parts & Accessories | 0 | 10-02-2009 08:38 AM |
Fit and Finish | Camaro Goon | 5th Gen Camaro SS LS LT General Discussions | 76 | 12-19-2007 06:28 PM |