[cdb95z28]

Originally Posted by AMICHIGANBZL11LE

Hi wondering the part number for a zl11le camber adjusting bolt?

Thank you.

Black zl11le

It's just a 10mm x 1.5 bolt, cheaper and more easily found at a hardware store. All Gen5 and Gen6 use the same thread pitch for front camber fine tuning. IIRC, I am using a 35mm UHL bolt in each knuckle. I thread locked them and I just leave them in. Don't crank them down super tight once you are finished with your alignment. Just lightly snug them and the thread lock will hold them. Pic of mine installed:

[cdb95z28]

Here is the GM bolt #: 92139192

List price is $32 each. Hardware store bolt will work just fine.