[Chutzpah]

Originally Posted by keep_hope_alive

Thanks, i've had my eye on the woolies. Just haven't ordered them yet since these wheels are coming off soon and the winter set won't get the same level of detail. But I think the woolies are the way to go moving forward.

If you’re taking your summer wheels off…I highly recommend ceramic coating them (at your leisure, during the winter). Much easier to keep them clean….

[keep_hope_alive]

Originally Posted by Chutzpah

If you’re taking your summer wheels off…I highly recommend ceramic coating them (at your leisure, during the winter). Much easier to keep them clean….

Yes, that is my exact plan. Remove, detail clean, ceramic coat. Any preferred brand of coating for the wheels?

[22SS1LE]

Originally Posted by keep_hope_alive

Yes, that is my exact plan. Remove, detail clean, ceramic coat. Any preferred brand of coating for the wheels?

new Technology out from Diamond Protech.
Its a nanodiamod instead of ceramic. the wheel coating is heat resistant to 1800 degrees.
I put it on my wheels. I also put their Diamond Body on the car as well
https://theragcompany.com/collection...diamond-wheels

[keep_hope_alive]

Car show Sunday! Still need to take the dealer tag off.

[ZPirate]

Originally Posted by keep_hope_alive

Car show Sunday! Still need to take the dealer tag off.

LOL! Yes you do.

[Jus Cruisin]

Originally Posted by keep_hope_alive

Car show Sunday! Still need to take the dealer tag off.

I'd take the emblem off the deck lid. I actually kept my Hendricks tag frame on my Corvette Z06.

[Chutzpah]

Originally Posted by keep_hope_alive

Yes, that is my exact plan. Remove, detail clean, ceramic coat. Any preferred brand of coating for the wheels?

Well, non that I can recommend…because I don’t know much better than what I have. I was given a bunch Simonize “not for resale” ceramic coating bottles (brother works at dealer). I’m sure it’s not the best, but it works great for my wheels / type of use.

[keep_hope_alive]

Originally Posted by Jus Cruisin

I'd take the emblem off the deck lid. I actually kept my Hendricks tag frame on my Corvette Z06.

Agreed, luckily it looks like it's easy to remove and the foam tape should just roll off.

[Palutz]

Finally got my hands on some OEM ZL1 front and rear carpets … took about a week of calling around to different suppliers but I’m really happy the way they look in my ZLE.

Also had my 1500 mile oil change and diff fluid change so she’s all set for the track.

[5.M0NSTER]

Let's see.

Got into it with a Porsche 918 Cayman


Nearly got an optimal lap before 2 slow Miatas ruined it


Watched that same slow Miata spin out earlier


Good day at the track over all.

The worst part was a 2019 SS 1LE hit the wall, and so did a few of those pesky Miatas.

[TheYankeeMarshal]

I hated the red and amber side markers so I switched them out for LED versions. I went with clear, I usually go with smoked, because I thought it would look good with the current clear taillights. I am not disappointed

[laynlo15]

Not a dam thing.

[CrushSS]

I'd be eternally grateful for some measurements. Replacing the SS emblem at rear bumper cover. No paper template or measurements included with the badge. Perhaps distance between park assist sensors and above body line in bumper? Thanks in advance.

[keep_hope_alive]

Originally Posted by TheYankeeMarshal

I hated the red and amber side markers so I switched them out for LED versions. I went with clear, I usually go with smoked, because I thought it would look good with the current clear taillights. I am not disappointed

I'm also considering the clear on my black car because I like the idea of adding a few chrome-like accents as a classic throw-back.

If there is a red/black theme, then obviously smoked makes sense.

I like your decision.