05-24-2020, 01:02 PM | #1 |
Drives: Camaro Join Date: Feb 2019
Location: Tychy
Posts: 29
|
J-pipe install
Hello, I installed my headers, unfortunately a drone appeared at a speed rpm of 1200-1490. What length cal should I install j-pipe. Thanks for the help in advance.
Maybe someone had a similar drone knows the length of the j-pipe. |
05-24-2020, 02:19 PM | #2 |
Drives: G8 Join Date: Mar 2012
Location: NJ
Posts: 251
|
This will get you in the ballpark
Sent from my Pixel 4 XL using Tapatalk |
05-24-2020, 06:25 PM | #3 |
Drives: 2010 Camaro SS/RS Join Date: Mar 2014
Location: somewhere in MD
Posts: 4,883
|
I’ve got some solo j pipes if you need them!
__________________
2010 2SS/RS
Z/28 intake, NW, FAST 102, speed engineering LT's, some exhaust, ATI -10% pulley, GM flex fuel injectors, DSX flex fuel sensor, MGW shifter, HP Tuners, some suspension work, stickers and a little weight loss. 12.63 @113.53 |
05-24-2020, 09:50 PM | #4 |
Drives: 2010 2SS/RS Join Date: Dec 2009
Location: Clarksville Tennesse.
Posts: 6,067
|
But does it just move the drone or completely get rid of it?
__________________
Orange Krush II
1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components. |
05-26-2020, 02:33 AM | #5 |
Drives: Camaro Join Date: Feb 2019
Location: Tychy
Posts: 29
|
Thank you for this chart. I wonder if installing j-pipe will help.
|
05-26-2020, 07:02 AM | #6 |
Drives: G8 Join Date: Mar 2012
Location: NJ
Posts: 251
|
|
|
|
|
|