Factory MTX Audio Amp/Sub installation... - Page 10 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

mbellis · 03-15-2012, 08:19 AM

Quote:

Originally Posted by Bryan2230

Finished installation today. Here are some pictures. They probably aren't great step by step pictures (i'm sorry).

Holes Marked:

Sub Grounded:

Holes Pilot Drilled:

Anchors set:

Speaker Wires enter cross member:

Sub Connected to battery:

Side wall carpeting re-installed:

Spare Tire cover back on:

Carpet re-installed:

Speakers plugged in:

Sub Installed, all wiring done:

Modified Mat, could be finished a bit better (but i'm done with it):

Did yours come with a fuse pre-installed, in either case mine didn't and I'm trying to figure out what size to go with, thanks in advance for the reply!

EATIT · 03-15-2012, 12:12 PM

I think you will be ok with a 50 amp fuse, I think thats what comes with it

TXSS · 04-05-2012, 09:57 PM

Quote:

Originally Posted by Gene Culley

It works on either sound system. For the BA it is plug and play. For the non BA you will have to take out some pins on the connectors and move them around and then plug in. All of the instructions to do so are included.

Any idea if just the harness can be purchased?

Kevinshawnm · 04-06-2012, 08:58 PM

Is that a 10 guage power wire???????

Lio Martinez · 12-26-2012, 01:52 AM

Quote:

Originally Posted by Bryan2230

Finished installation today. Here are some pictures. They probably aren't great step by step pictures (i'm sorry).

Holes Marked:

Sub Grounded:

Holes Pilot Drilled:

Anchors set:

Speaker Wires enter cross member:

Sub Connected to battery:

Side wall carpeting re-installed:

Spare Tire cover back on:

Carpet re-installed:

Speakers plugged in:

Sub Installed, all wiring done:

Modified Mat, could be finished a bit better (but i'm done with it):

Bro I also have the all weather mat and im gonna install the MTX subwoofer... Alot of people say both of these ain't for together what dis u do to it ?

lscamaro · 12-26-2012, 02:20 AM

He cut it.

Lio Martinez · 12-26-2012, 11:35 AM

Quote:

Originally Posted by lscamaro

He cut it.

Yeah but how ? And from where ? Just tge corners ?

lscamaro · 12-26-2012, 11:48 AM

No, just look under the sub box. You can see it's cut to conform to the square box

mlmvl · 02-16-2013, 09:59 AM

Did you ever figure out if the harness can be purchased? I just bought one of the MTX enclosures from a guy who traded in his coupe for a convertible. He pulled the box but left the harness in.

mcsoul · 02-24-2013, 07:42 PM

What does this sub weigh?

Ruffrider51 · 03-05-2013, 07:01 AM

About 35 pounds

mcsoul · 03-11-2013, 08:26 AM

Thank you!

vonrebel · 04-11-2013, 10:29 PM

Where can i buy the parts to reinstall this same sub in my new 2013 Camaro? I took this sub out of my 2011 2SS before i sold it a year ago, but forgot to take the wiring and plate with it. errrrrrrr...... Hopefully this sub will work in the 2013 Camaros? Many Thks

Firefighter · 04-12-2013, 08:15 AM

I would start at the dealer. I have a feeling you might be SOL though.

12-26-2012, 02:20 AM	#132
lscamaro Drives: 2011 CGM Camaro LS A6 Join Date: Jan 2011 Location: San Antonio, Texas Posts: 10,305	He cut it. __________________ Click Picture for Build Thread

12-26-2012, 11:48 AM	#134
lscamaro Drives: 2011 CGM Camaro LS A6 Join Date: Jan 2011 Location: San Antonio, Texas Posts: 10,305	No, just look under the sub box. You can see it's cut to conform to the square box __________________ Click Picture for Build Thread

03-05-2013, 07:01 AM	#137
Ruffrider51 Drives: Victory Red 2011 2SS W/RS package Join Date: Feb 2013 Location: Houston Tx Posts: 53 View My Garage	Sub weight. About 35 pounds

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
irpq11 has permagrin...updated with vids.....	PQ	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	198	01-15-2014 12:23 AM
Superchips checking in	Scott@Superchips	Tuning / Diagnostics -- engine and transmission	127	10-24-2013 04:54 AM
My Massive Car Audio Installation	DJ ATOMIX	Audio, Video, Bluetooth, Navigation, Radar, Electronics Forum	103	06-08-2010 10:34 AM
2010 Camaro MagnaCharger + INSTALLATION	hoekdup	Forced Induction	4	11-28-2009 04:50 AM
USB port	The_Stache	Audio, Video, Bluetooth, Navigation, Radar, Electronics Forum	85	09-20-2009 01:44 PM

03-15-2012, 12:12 PM	#128
EATIT Drives: 2010 camaro 2LT/Rally Yellow Join Date: Feb 2012 Location: United States Posts: 78	I think you will be ok with a 50 amp fuse, I think thats what comes with it

04-06-2012, 08:58 PM	#130
Kevinshawnm Biggz Drives: 2010 Camaro 2SS L99 Rally Yellow Join Date: Jul 2011 Location: Richmond, Indiana Posts: 567	Is that a 10 guage power wire???????

02-16-2013, 09:59 AM	#135
mlmvl Drives: 2010 Camaro SS ZL575 Join Date: Mar 2010 Location: Clayton Posts: 71	Did you ever figure out if the harness can be purchased? I just bought one of the MTX enclosures from a guy who traded in his coupe for a convertible. He pulled the box but left the harness in.

02-24-2013, 07:42 PM	#136
mcsoul Drives: Want a gen 6 Join Date: Jan 2013 Location: 75089 Posts: 1,032	What does this sub weigh?

03-11-2013, 08:26 AM	#138
mcsoul Drives: Want a gen 6 Join Date: Jan 2013 Location: 75089 Posts: 1,032	Thank you!

04-11-2013, 10:29 PM	#139
vonrebel Drives: 2021 2SS 1le Shock Join Date: Feb 2011 Location: Mid-West Posts: 198	Where can i buy the parts to reinstall this same sub in my new 2013 Camaro? I took this sub out of my 2011 2SS before i sold it a year ago, but forgot to take the wiring and plate with it. errrrrrrr...... Hopefully this sub will work in the 2013 Camaros? Many Thks

04-12-2013, 08:15 AM	#140
Firefighter Drives: Black '13 2SS/RS/1LE w/NPP/NAV Join Date: Oct 2012 Location: Tampa by way of Miami... Posts: 4,934	I would start at the dealer. I have a feeling you might be SOL though.