Strange noise that follows engine rpm - 2SS/RS - Page 6 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

SSCam15 · 03-21-2010, 02:04 PM

Happy to say I took the car out of hibernation yesterday and took it for a nice long dry. Still no noise has returned

HondaEx · 03-21-2010, 09:54 PM

I had a similar issue, although I have a 2LT RS. After approximately 200 miles a noticed a sound very similar to that of placing a playing card on bicycle spokes. The sound started at 13 mph and increased from there. It exactly followed engine RPM. I immediatlely called Onstar to see if they noticed any problems with the car (none). Several minutes later the sound went away.

After pulling over to the side of the road, I did notice some loose electrical tape on some wiring bundles close to the fans. Maybe some of this tape contacted the fan and came loose after several minutes of contact? Anyway, I haven't noticed it since.

NinoSS · 03-22-2010, 10:29 AM

Quote:

Originally Posted by SGOS252382

I just got the new part put on my car today. The noise is gone. No weird noises coming from behind the glove box at rpms. The coffee maker has been removed (thats kind of what it sounded like in my car - a ticking/water moving type sound).

So if you're experiencing any weird sounds coming from behind your glove box just take your car to the dealer and they should know what it is and order you the part.

Here's the description of what was done.

Checked and installed coolant restictor as e per TSB 09-01-37-001 for noise from heater area.

Parts
- 10188036 - valve as
- 12337820 - strap, I/
- 1470030 - clamp

I just spoke to Paramus Auto mall over the phone and they that TSB's are not covered under warranty?

If they know it is an issue, how can they charge the customer???

CamaroHutch · 06-03-2010, 02:36 PM

Quote:

Originally Posted by NinoSS

I just spoke to Paramus Auto mall over the phone and they that TSB's are not covered under warranty?

If they know it is an issue, how can they charge the customer???

That's a load of garbage... TSBs are covered by warranty

toilets · 05-24-2011, 10:36 AM

This forum is fantastic!! I have the same issue, ls3 2010 with a coffee maker type noise coming from the glove box... Called my dealer, gave the TSB number and popped right up and said bring it in and we will replace the parts!

Thanks so much everyone for information on this forum!

DVAS · 06-10-2011, 07:40 PM

Gang, didnt flip through each page on here to see if anyone posted this yet, (sorry if they did but want to add two cents)

Search forum for heater core TSB or sort of valve replacment. while I was trolling around on here looking into my exhaust leak, found some interesting stuff about heater core valves being replaced making a gurgeling sound, fluid like sound... good luck gang

siriusdish · 11-16-2011, 11:00 PM

I noticed this today on 2010 L99 Park @ 2k Sounds like water in glove box. Not serious right? Car is not under warranty any longer,lol.

03-21-2010, 09:54 PM	#72
HondaEx Drives: 2010 2LT RS Join Date: Mar 2010 Location: Humble, TX Posts: 44	Noise Following RPM I had a similar issue, although I have a 2LT RS. After approximately 200 miles a noticed a sound very similar to that of placing a playing card on bicycle spokes. The sound started at 13 mph and increased from there. It exactly followed engine RPM. I immediatlely called Onstar to see if they noticed any problems with the car (none). Several minutes later the sound went away. After pulling over to the side of the road, I did notice some loose electrical tape on some wiring bundles close to the fans. Maybe some of this tape contacted the fan and came loose after several minutes of contact? Anyway, I haven't noticed it since.

11-16-2011, 11:00 PM	#77
siriusdish Drives: 2010 Camaro L99 Join Date: Oct 2009 Location: Erie PA Posts: 1,226	I noticed this today on 2010 L99 Park @ 2k Sounds like water in glove box. Not serious right? Car is not under warranty any longer,lol. __________________ 2010 L99 vararam intake, Vmax TB,Vmax Intake,TSP VVT 3 Cam,TSP underdrive pulley,Yank 3600,TM Cooler,ARH 2", High Flow cats, X-pipe, GM Pro mufflers, RX Catch Can,160 stat, BMR Trailing,toe,Cradle insert, Diff. Bushings, End links, Spohn-LCA's (Touring)Wheel spacer's. 422 rwhp Mustang Dyno http://www.youtube.com/watch?v=AaFNAhCL7Os

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
ZL1 Camaro	94blackcamaroz28	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	57	07-10-2008 11:09 PM
Camaro ls3 news...true or false?	Dark Knight	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	74	06-05-2008 05:29 PM
5th Gen Camaro LS3 info from Chevy Hi-Po...READ	TAG UR IT	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	295	03-07-2008 10:06 AM
Axial Vector Engine	Mr. Wyndham	General Automotive + Other Cars Discussion	6	06-20-2007 04:00 PM
GM Attempting to keep Camaro Buzz alive for 2 years	rray200	5th Gen Camaro SS LS LT General Discussions	32	02-01-2007 04:44 PM

03-21-2010, 02:04 PM	#71
SSCam15 Drives: '83 Blk SC & '10 RYell 2SS/RS Join Date: May 2009 Location: Northeast Posts: 21	Happy to say I took the car out of hibernation yesterday and took it for a nice long dry. Still no noise has returned

05-24-2011, 10:36 AM	#75
toilets Drives: 2010 camaro Join Date: May 2011 Location: Southeast, Posts: 842	This forum is fantastic!! I have the same issue, ls3 2010 with a coffee maker type noise coming from the glove box... Called my dealer, gave the TSB number and popped right up and said bring it in and we will replace the parts! Thanks so much everyone for information on this forum!

06-10-2011, 07:40 PM	#76
DVAS Drives: 2011 Camaro 2SS Join Date: Apr 2011 Location: Florida Posts: 100	Gang, didnt flip through each page on here to see if anyone posted this yet, (sorry if they did but want to add two cents) Search forum for heater core TSB or sort of valve replacment. while I was trolling around on here looking into my exhaust leak, found some interesting stuff about heater core valves being replaced making a gurgeling sound, fluid like sound... good luck gang