Noise in the front, look here....might have something for you, +fill strutplate gap! - Page 11 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Camarowguy · 06-19-2011, 07:24 AM

Quote:

Originally Posted by TAG UR IT

I don't know why anyone would have raised it off the ground to paint the bumper, though. I dropped it off and it wasn't popping anymore. Got it back and it started again. Not sure why, but it's possible.

And as far as your toilet mod, go back and read post 53....errr was it 54?

Lol, my bad man.....I couldn't remember who all did it! Glad you luge it tho. Now we gotta get to the root of this noise. I'll get back on it next week. I'm out of town right now.

*TAG UR IT* · 06-20-2011, 12:39 AM

Quote:

Originally Posted by Camarowguy

Lol, my bad man.....I couldn't remember who all did it! Glad you luge it tho. Now we gotta get to the root of this noise. I'll get back on it next week. I'm out of town right now.

Nah, it's all good...I was only kidding around in my post and it wasn't meant to be taken mean. But yeah, I saw what you did and it was an easy $8 at HD. ...easy....

But...

I want to take off the hood and hook up some cameras on the b!tch. I want to see how it's popping out of place and back in and figure out exactly how that damn popping occurs.

pnyklr · 06-20-2011, 12:52 PM

Quote:

Originally Posted by TAG UR IT

I want to take off the hood and hook up some cameras on the b!tch. I want to see how it's popping out of place and back in and figure out exactly how that damn popping occurs.

Well, get on it already!

-Funk

JusticePete · 06-20-2011, 02:48 PM

The strut mount doesn't really float unless the car unloads the suspension as in airborne. I have to get with TAG this week and check out his noises.

Camarowguy · 06-20-2011, 05:45 PM

Quote:

Originally Posted by JusticePete

The strut mount doesn't really float unless the car unloads the suspension as in airborne. I have to get with TAG this week and check out his noises.

I wonder if I can record my noises with the chassis ears.

JusticePete · 06-20-2011, 06:46 PM

Quote:

Originally Posted by Camarowguy

I wonder if I can record my noises with the chassis ears.

Most have a headphone jack so the answer would be yes.

Johnblaze · 06-20-2011, 08:29 PM

anyone figure it out??

Quote:

Originally Posted by Johnblaze

ok... boys, I took my camaro back to the shop when i had the noise to start with... the advisor stated that the noise was normal, we then took another new camaro out and low and behold, the same noise was in the new camaro also!

it sure sounds like a pile of junk when ya go a tiny too fast over a speed bump, also, if the interstate is being repaved, and you come across an area where the pavement drops to the next layer... again.. it just don't sound right...... i agree, it's something with the design

and yet, nobody here has figured out what is really causing the noise.
yeah, it could be this, or that, this or that...

has anyone... figured it out?

JusticePete · 06-20-2011, 10:18 PM

I am listening....

*TAG UR IT* · 06-21-2011, 12:42 AM

Quote:

Originally Posted by JusticePete

The strut mount doesn't really float unless the car unloads the suspension as in airborne. I have to get with TAG this week and check out his noises.

Sounds great to me.

I know the rear pinging sounds I'm hearing are due to the LCA's. That'll get fixed in no time once we weld in the new braces. Becky from Rodgers Chevrolet sent me the new upper upper spring mounts and before I went to put them in, the noise disappears. Needless to say, I was pretty floored when the noises stopped. And now? They're baaaack...lol

I'll call Glen tomorrow and see what he can do for us this week in a morning.

JusticePete · 06-21-2011, 04:30 PM

Quote:

Originally Posted by TAG UR IT

Sounds great to me.

I know the rear pinging sounds I'm hearing are due to the LCA's. That'll get fixed in no time once we weld in the new braces. Becky from Rodgers Chevrolet sent me the new upper upper spring mounts and before I went to put them in, the noise disappears. Needless to say, I was pretty floored when the noises stopped. And now? They're baaaack...lol

I'll call Glen tomorrow and see what he can do for us this week in a morning.

You have been upgraded. No welding required you get the super extreme over the top best of class bolt in brackets.

*TAG UR IT* · 06-22-2011, 12:14 AM

Quote:

Originally Posted by JusticePete

You have been upgraded. No welding required you get the super extreme over the top best of class bolt in brackets.

Exactly why I waited.

Johnblaze · 06-22-2011, 03:12 PM

actually sounds as if the suspension is either topping out or bottoming out, even over small little pot holes or pavement that is being worked on, even an uneven sewer plate ...

hope someone figures it out...

Quote:

Originally Posted by Johnblaze

ok... boys, I took my camaro back to the shop when i had the noise to start with... the advisor stated that the noise was normal, we then took another new camaro out and low and behold, the same noise was in the new camaro also!

it sure sounds like a pile of junk when ya go a tiny too fast over a speed bump, also, if the interstate is being repaved, and you come across an area where the pavement drops to the next layer... again.. it just don't sound right...... i agree, it's something with the design

and yet, nobody here has figured out what is really causing the noise.
yeah, it could be this, or that, this or that...

has anyone... figured it out?

Napper · 06-24-2011, 08:59 AM

here it is even the dealer has pulled many cars off the line..

and it does it.

well thats it for chasing ghosts ..turn your music up...i have changed everything
to upgrade and i was told some noises are gonna occur..

just get a safety note written....all is workiing fine...and you are safe..

lately i pull up to suspenioned stangs and challengers and they make noises too.

ignore it unlesss its real loud if its minor....and it always does it

thats normal.....again when the dealer shows any off the lot car doing the same..

you really can't fight city hall.

try it. My V did something i though was strange...they pulled a new one up
( after a full inspection of mine) and walla....same thing

i stopped worring.....same with spherical endlinks....they are noisey..
i have new co////and they make the same noise...
so it is the design/.

Mike at pedders is highly regarded..but if he can't pin it down...then
you really think a car dealer will????

NORMAL

i show no usnusual wear....and when i'm on it it handles superbly...

i can handle a tighter suspesion making some creeks.

unless you do the whole suspension its gonnna make some odd noises

i've checked everything and its all tight.

Johnblaze · 06-24-2011, 09:18 PM

https://www-odi.nhtsa.dot.gov/ivoq/online.cfm

Everone needs to file a complaint! maybe we can get someting done!

06-24-2011, 08:59 AM	#153
Napper Drives: 2SS RS A6/ CTS-V A6 LSA Join Date: Mar 2010 Location: SE Florida Posts: 258	here it is even the dealer has pulled many cars off the line.. and it does it. well thats it for chasing ghosts ..turn your music up...i have changed everything to upgrade and i was told some noises are gonna occur.. just get a safety note written....all is workiing fine...and you are safe.. lately i pull up to suspenioned stangs and challengers and they make noises too. ignore it unlesss its real loud if its minor....and it always does it thats normal.....again when the dealer shows any off the lot car doing the same.. you really can't fight city hall. try it. My V did something i though was strange...they pulled a new one up ( after a full inspection of mine) and walla....same thing i stopped worring.....same with spherical endlinks....they are noisey.. i have new co////and they make the same noise... so it is the design/. Mike at pedders is highly regarded..but if he can't pin it down...then you really think a car dealer will???? NORMAL i show no usnusual wear....and when i'm on it it handles superbly... i can handle a tighter suspesion making some creeks. unless you do the whole suspension its gonnna make some odd noises i've checked everything and its all tight. __________________ 10 2SS(7Psi)/10 CTS-V(9Psi) L99, ADM RACE CAI, TVS 2300,LG- Headers and X pipe ,catless 3 inch back w/Magnaflows , Ngk plugs,Msd wires,180 stat,Springs ( lowered 1"- looks solidly correct)Sways and endlinks,BMR trailing arms, Slotted rotors and Hawk HPS ,tuned ,Black out bowtie and custom (black)"SS" on sides /midnight rims (8psi) 2010 Raven (triple black.)CTS-v , crank pulley, Bubb CAI , AR Headers, custom catlessback. magnaflows. tune ( 9psi) former LS7, LS2 and LS1 owner.(Zo6, GTO's, WS6) Last edited by Napper; 06-24-2011 at 09:20 AM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
ZL1 / CTS-V Brakes	JusticePete	Suspension / Brakes / Chassis	584	10-14-2021 09:33 AM
Poll -- Camaro vs Mustang Supercar Shootout	JusticePete	Suspension / Brakes / Chassis	105	10-09-2013 02:18 PM
Got Pulled over...	TRSS2	Cosmetics and Lighting Modification Discussions	39	03-08-2010 11:57 AM
2010 Camaro SS Blue in Syracuse NY $32690	Mitsubishi in Syracuse	Camaro Price \| Ordering \| Tracking \| Dealers Discussions	0	12-31-2009 02:44 PM
2010 Blue SS for $32990 and we pay for your plane ticket!	Mitsubishi in Syracuse	Dealer Camaros for Sale	0	12-21-2009 12:42 PM

06-20-2011, 02:48 PM	#144
JusticePete Drives: Camaro Justice Join Date: Jun 2007 Location: Virginia Posts: 20,174	The strut mount doesn't really float unless the car unloads the suspension as in airborne. I have to get with TAG this week and check out his noises.

06-20-2011, 10:18 PM	#148
JusticePete Drives: Camaro Justice Join Date: Jun 2007 Location: Virginia Posts: 20,174	I am listening....

06-24-2011, 09:18 PM	#154
Johnblaze Drives: 2010 Camaro LS V-6 Join Date: Feb 2011 Location: Lakeland, Fl Posts: 32	https://www-odi.nhtsa.dot.gov/ivoq/online.cfm Everone needs to file a complaint! maybe we can get someting done!