StabiliTrak Problems with Camaro (help please!) - Page 2 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

khalsa013 · 01-05-2011, 05:46 PM

the harness on mine got loose and ripped out, take it to teh dealership and theyll fix it...they did with mine.

*Mindz* · 02-14-2011, 12:01 PM

Here is the service bulletin for this problem. It appears that there could be one or more wires chaffed enough to have a nick in the insulation. I had the one in this service bulletin, and also the wire to the Crankshaft Position Sensor" was routed over the starter housing and it was nicked pretty severely. After they fixed both wires, the issue happened again 4 days later. I broughtr it back and they found that the Crankshaft Position Sensor itself was bad also (most likely caused from the wires shorting out).

Since replacing the sensor, I've had no problems. =) Go ahead and print this out and bring it into your dealership.

ffrcobra_65 · 02-14-2011, 12:47 PM

make sure you have good record and retain all documentation for all work related to this problem. If they can't get it right after multiple attempts, lemon law the car and get a new one.

02-14-2011, 12:01 PM	#16
Mindz E.B.A.H. Drives: you wild... Join Date: Mar 2007 Location: In the happy padded room wearing a jacket that makes me hug myself... Posts: 18,421	Here is the service bulletin for this problem. It appears that there could be one or more wires chaffed enough to have a nick in the insulation. I had the one in this service bulletin, and also the wire to the Crankshaft Position Sensor" was routed over the starter housing and it was nicked pretty severely. After they fixed both wires, the issue happened again 4 days later. I broughtr it back and they found that the Crankshaft Position Sensor itself was bad also (most likely caused from the wires shorting out). Since replacing the sensor, I've had no problems. =) Go ahead and print this out and bring it into your dealership. Attached Images __________________ Blue Rush, 2010 SS [Car of the Week 3/22/2010] Traded in on...ZLZBUBB, 2013 ZL1

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Setting up an IRS/Drivetrain for Drag Racing	Kyle2k	Suspension / Brakes / Chassis	44	06-05-2010 09:17 PM
Installation Camaro Needed for Manual for a Justice Install Package in SF Bay Area	Info@PeddersUSA.com	USA - California	6	04-30-2010 08:02 PM
GM memo to dealers	Moose	5th Gen Camaro SS LS LT General Discussions	41	02-04-2010 07:33 PM
The DEFINITIVE EXPLANATION OF CAMARO SUSPENSION, ISSUES, AND UPGRADES	Info@PeddersUSA.com	Suspension / Brakes / Chassis	106	10-19-2009 06:08 PM
Answeres to questions I have stumbled on	dieseldave24v	5th Gen Camaro SS LS LT General Discussions	13	02-23-2009 06:56 PM

01-05-2011, 05:46 PM	#15
khalsa013 Drives: 2ss & ZL1 Join Date: Oct 2010 Location: wisconsin-Miwaukee Posts: 675	the harness on mine got loose and ripped out, take it to teh dealership and theyll fix it...they did with mine.

02-14-2011, 12:47 PM	#17
ffrcobra_65 Account Suspended Drives: SuperCharged 2SS/RS IOM MN6 Join Date: May 2009 Location: CA Posts: 5,094	make sure you have good record and retain all documentation for all work related to this problem. If they can't get it right after multiple attempts, lemon law the car and get a new one.