11-22-2016, 01:41 PM | #407 |
THERAPY
|
really wish they would chime in on this thread. I told them at SEMA that there was a thread on Camaro5 already about this new unit and it was already like 20 pages. They were like "whoa" really.
|
11-24-2016, 12:23 PM | #408 |
Drives: 2017 2SS 50th Anv, 1972 RS Join Date: Mar 2009
Location: Oklahoma City
Posts: 1,588
|
So I contacted tech support about the Hazzard button and SWC issues. Here is the response. I also gave them the link to this thread.
The hazard button issue has been corrected. If you have an early release kit then you can contact customer service and they will send a new gasket to replace the one that is causing the issue. As far as the SWC, they should be pre programmed. If you have the most current firmware revision flashed to the radio module there should not be any issues with SWC. Jeremy Doran MECP Advanced Certified ASE6 Certified Technical Support Advisor AAMP of America 800-477-2267 |
11-24-2016, 07:16 PM | #409 |
THERAPY
|
Hope this is true
|
11-24-2016, 10:12 PM | #410 |
Drives: '11 SGM 1LT/RS, '02 SOM Firehawk Join Date: Jan 2014
Location: near Chicago
Posts: 450
|
Yeah. Me too!
__________________
Yippee38
|
11-24-2016, 11:39 PM | #411 | |
|
Quote:
Sorry gentlemen, but even with the new software, at least in my case the SWC program is not retained upon power failure. It has been my finding that even the convenience controls are lost. When you first set these up you select the aftermarket configuration. Upon power failure you go back in and have to reselect aftermarket selection and reset the convenience settings. I also and this is my case, am not able to get the PAC unit to program any SWC pertaining to the phone. I can program everything else but not these. I have better luck just letting it stay in default program mode. At least some of the controls work, I just cannot reassign them to how I want them to work. But never the less even those are lost upon power failure. PAC say's they do not understand why. Of course all you get when you call them is their call center which is only available to dealers on Saturdays. I thought I was making progress with them for a while but now get the feeling I am on my own. I have ordered the parking brake bypass cable to see if this will unlock additional controls in my head unit. The fix for the hazards is a step forward I guess.
__________________
There's more to life than gas mileage
LS3, Whipple, Custom Comp Cam, springs, pushrods, timing set, CAI intake, Apex cold air scoop, Doug Thorley TRI-Y headers, Billet Custom Products baffled Valve covers, Mighty Mouse Catch can, ADM FPCM, ZL1 fuel pump, MSD boost-a-pump, Hex Vent hood vents, ProSport gauges(fuel pressure, AFR, Boost), Corsa, 100 cell Cats. Jannetty remote tuned, Pfadt trailing arms, all parts user installed. No Dyno yet. Manual trans. 3.45 gears. |
|
11-25-2016, 07:50 AM | #412 | |
Drives: 2017 2SS 50th Anv, 1972 RS Join Date: Mar 2009
Location: Oklahoma City
Posts: 1,588
|
Quote:
|
|
11-28-2016, 08:48 PM | #413 |
THERAPY
|
No new installs? going to be getting mine installed on the 22nd of December. Hopefully I won't have issues. I'm going to get mine painted as well to match interior prior to install.
|
11-28-2016, 09:27 PM | #414 |
Drives: 2017 2SS M6 Join Date: Jun 2013
Location: WNY
Posts: 7,070
|
can you use a memory saver? one that plugs into the cigarette lighter or OBDII socket. I bet they are not using flash memory so firmware will not correct the problem.
__________________
real ZL1 wheels and brakes, 285/305 Michelin Pilot Super Sports, Pray ported Intake manifold, Soler Throttle Body, Rotofab intake, EFI Tuning Flex fuel kit, full American Racing Headers Exhaust, 1 7/8" w/ cats H pipe and mufflers. Full 1LE suspension, with BMR adjustable sway bars and links, GM aluminum cradle bushings, Hurst shifter with lighter reverse spring, TWM shifter knob, Tick level 1 transmission. I should have bought a ZL1
|
11-29-2016, 07:05 AM | #415 | |
Drives: 2015 2LS Join Date: Mar 2016
Location: Atlanta
Posts: 238
|
Quote:
As others have stated, not sure why you would paint it unless you just want something different. Out of the box matches the factory interior. Pleased with my install. After the initial issues (hazard switch inoperative, radio display not dimming, and chime module missing) were resolved, I have had no other problems.
__________________
|
|
11-29-2016, 10:36 AM | #416 |
Drives: '11 SGM 1LT/RS, '02 SOM Firehawk Join Date: Jan 2014
Location: near Chicago
Posts: 450
|
Damn. That looks nice.
__________________
Yippee38
|
11-29-2016, 06:05 PM | #417 | |
THERAPY
|
Quote:
|
|
11-29-2016, 10:27 PM | #418 | |
Drives: 2017 2SS 50th Anv, 1972 RS Join Date: Mar 2009
Location: Oklahoma City
Posts: 1,588
|
Quote:
|
|
11-30-2016, 08:12 AM | #419 |
Drives: 2015 2LS Join Date: Mar 2016
Location: Atlanta
Posts: 238
|
*************
Its listed in my signature line.
__________________
|
12-01-2016, 08:34 AM | #420 |
H-Town Camaro Club
Drives: 2013 Dusk Edition 2SS/M6/Sun/NPP Join Date: May 2014
Location: Houston
Posts: 2,234
|
Dude what? lol, my hero.
__________________
|
|
|
|
|