12-15-2010, 05:18 PM | #1 |
|
"fixed" spoiler chipping today
I'm one of the many that have had the spoiler chipping problem. I finally took the spoiler off to find A LOT of damage under the spoiler. I picked up some rubber washers at Lowes and touched up the chips with Dr. Chip. I think the size washers that I used was 3/8x7/8x1/16. Here are the before pictures.
After the touch up paint Spoiler with spacers The good news is you really cant see any of the touch up paint. It wasn't really all that pretty, but it was to prevent rust. I didn't want to get my lid repainted since I have a custom bowtie and am leary about color matching. This will do just fine. On the outside of the spoiler it is a very nice distance from the lid and in the middle it's a little higher than I would like, but it will serve its purpose. |
12-15-2010, 05:26 PM | #2 |
Drives: 2010 2SS IOM L99 Join Date: Jan 2010
Location: LOUISVILLE,KY..
Posts: 7,545
|
why didn't you have the dealer fix it ?
|
12-15-2010, 05:33 PM | #3 |
Drives: A Gift From My Wife Join Date: Apr 2009
Location: Powder Springs, GA
Posts: 1,557
|
What does the dealer "fix" entail?
-Funk |
12-15-2010, 07:07 PM | #4 |
|
|
12-15-2010, 08:40 PM | #5 |
Drives: 2019 C7 Stingray Join Date: Jul 2010
Location: USA
Posts: 558
|
How difficult was it to remove the spoiler?
|
12-15-2010, 08:51 PM | #6 |
Member
Drives: 2010 ABM 2SS/RS LS3 Join Date: Feb 2009
Location: Where you vacation...Tahoe
Posts: 928
|
I think its going to flap at high speed
__________________
.
|
12-15-2010, 09:08 PM | #7 |
Account Suspended
Drives: nothing Join Date: Nov 2010
Location: a hole
Posts: 17,906
|
|
12-15-2010, 10:13 PM | #8 |
|
I doubt it. It's torqued down just like OEM. I pressed firmly down everywhere on the spoiler and it's solid
|
12-15-2010, 10:18 PM | #9 |
|
It's very easy. 6 nuts and a plastic clip to press and pull the spoiler out. You'll know what I'm talking about when you see it. I'm upset with my dealer because I called them a week ago to check back in with the body shop about the chipping. I have not gotten a response and decided to fix it for $3 by myself.
|
12-16-2010, 08:10 AM | #10 | |
Senior Camaro Fanatic
Drives: 2011 SS/RS manual - White Join Date: Aug 2010
Location: aiken, sc
Posts: 1,980
|
Quote:
I agree with this approach. Sometimes taking your car to the dealer is far more trouble than it's worth. I have respect for my local dealer, but I cannot respect the amount of time they spend and the nuisance of getting a ride to and fro if you dont wait on the car |
|
12-16-2010, 11:34 AM | #11 |
|
I cannot believe there is not a TSB yet.
|
12-16-2010, 01:45 PM | #12 |
Drives: 2010 SS,RJT,A6,Grey Int.,Silv.rally Join Date: Jul 2010
Location: Orlando
Posts: 10
|
Ya Ackeight, Took mine off after seeing a little chipping on passenger side with only 100 miles on vechicle. Looked almost exactly like yours or even worse !!! Mine is RJT with silver rallies !! Dreaded taking it too dealer for complete trunk lid repaint, so decided to do same as you and repair it best i could. ACE hardware had the rubber washer and a also bought there Super Firm Sponge Tape ( closed cell ) Size: 1/4 in. x 3/8 in. x 10' long to replace the to thin OEM tape on spoiler. The dealer did give me touch up paint free of charge but i did the touch up and rubbing compound work !! Now it is much better and spoiler doesn't rest on the trunk lid any more. It does sit higher now like yours does. Saw new 2011 camaros at the local New auto show, and there spoilers are now all lifted off the lids like this too .. Apparantly the assembly line got the word of there mess up of the earlier spoiler mounting on 2010's and some 2011's ..
|
12-16-2010, 09:01 PM | #13 |
Drives: 2010 IOM 1SS Join Date: Aug 2010
Location: Northern Virginia
Posts: 204
|
There is an updated gasket kit that GM has engineered and GM's engineering department is currently proofing the TSB on this. I have been working with GM exec support in Detroit now for about a month now. They bought me a MPD1 wing to cover up chipping and I am not waiting on the updated gasket kit for the MPD1 wing ...
__________________
He said he liked my car and let me off with a warning. Next Day I got a ticket .... |
12-18-2010, 10:37 PM | #14 |
Drives: 2011 2SS RS, 1968 ragtop Join Date: Apr 2009
Location: Indiana
Posts: 1,850
|
__________________
1968 Camaro Convertible LS1, T56
|
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
**** Rear Spoiler and Rear Diffuser Now On Sale ***** | SicMSP | Exterior Parts & Accessories | 9 | 10-20-2010 04:13 PM |
spoilers? diffusers? | AdnanHfuda | General Automotive + Other Cars Discussion | 6 | 06-05-2010 12:10 PM |
Extreme Dimensions / Duraflex "Hot Wheels" Camaro spoiler FOR SALE | nUcLeArEnVoY | Exterior Parts & Accessories | 1 | 04-05-2010 07:31 PM |
Answers to people asking about the highwing spoiler; | DJ ATOMIX | Cosmetics and Lighting Modification Discussions | 21 | 06-29-2009 07:46 PM |
Request for spoiler mount pictures | KK2010SS | Camaro Photos | Spyshots | Video | Media Gallery | 2 | 05-27-2009 10:35 AM |