10-06-2012, 06:55 PM | #1 |
Drives: 2013 Mustang 5.0 Join Date: Apr 2012
Location: CA
Posts: 103
|
Differential clutch gone bad?
Took my 2012 1LS to the dealer for a groaning noise that I would hear coming from the differential area while at slow speeds and making turns (i.e. in a parking lot type situation). They said it is something to do with the rear differential clutch and that they need to tear it all down and find out which part is broken and replace it. Has anyone else had this problem? I guess I am wondering if this is a somewhat common type of thing to go wrong, or is it just a fluke?
__________________
2012 1LS w/ Roto-Fab intake, Dynomax VT exhaust, RX Catch Can, Ported TB
|
10-06-2012, 07:37 PM | #2 |
COTW 5/06/2013
Drives: 2017 Corvette Grand Sport-Ho-Vette Join Date: May 2012
Location: Milford, Michigan
Posts: 3,201
|
I would change the fluid first and make sure friction modifier is added, drive again and see if it goes away.
__________________
2017 Grand Sport, Borla X Pipe.....Enough Said
|
10-06-2012, 08:15 PM | #3 |
Drives: 2013 Mustang 5.0 Join Date: Apr 2012
Location: CA
Posts: 103
|
Don't really have time this weekend unfortunately, and I have an appointment to drop it off on Monday, do you think it would be detrimental to just let them take it apart and re-build it since it will be covered under warranty anyway?
__________________
2012 1LS w/ Roto-Fab intake, Dynomax VT exhaust, RX Catch Can, Ported TB
|
10-06-2012, 08:26 PM | #4 |
COTW 5/06/2013
Drives: 2017 Corvette Grand Sport-Ho-Vette Join Date: May 2012
Location: Milford, Michigan
Posts: 3,201
|
May not need to be pulled apart, is their tech good and can he set the proper gear mesh on new gears.... I would do the fluid first they should do the same...under warranty
__________________
2017 Grand Sport, Borla X Pipe.....Enough Said
|
10-09-2012, 07:33 PM | #5 | |
Drives: 2011 M6 LS Join Date: Jun 2011
Location: SE Michigan
Posts: 155
|
Quote:
__________________
|
|
10-09-2012, 09:23 PM | #6 |
Drives: 2013 Mustang 5.0 Join Date: Apr 2012
Location: CA
Posts: 103
|
They called today, said nothing was broken and that they just added some friction modifier and said it should go away within 500 miles.
__________________
2012 1LS w/ Roto-Fab intake, Dynomax VT exhaust, RX Catch Can, Ported TB
|
10-10-2012, 07:28 AM | #7 |
COTW 5/06/2013
Drives: 2017 Corvette Grand Sport-Ho-Vette Join Date: May 2012
Location: Milford, Michigan
Posts: 3,201
|
I resemble that remark
__________________
2017 Grand Sport, Borla X Pipe.....Enough Said
|
10-10-2012, 10:47 AM | #8 |
Drives: 2013 Mustang 5.0 Join Date: Apr 2012
Location: CA
Posts: 103
|
Ya you were right. I guess I just figured since it is under warranty and it was already in for another issue, let them do what they want and figure it out.
__________________
2012 1LS w/ Roto-Fab intake, Dynomax VT exhaust, RX Catch Can, Ported TB
|
|
|
|
|