How much for a resonator delete? - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Jaime068 · 10-13-2011, 11:23 AM

How much did u guys pay for those who got it done?

Jaime068 · 10-13-2011, 02:21 PM

bump

squirell · 10-13-2011, 02:31 PM

My guy charged $80..still quiet under light acceleration
,but the growl comes on louder and earlier under heavier and full throttle.
I very happy with this little mod,sounds great when your on it.

Jaime068 · 10-13-2011, 02:52 PM

what exhaust do u have on your camaro?

DJ ATOMIX · 10-14-2011, 12:03 PM

Mine costed me $166 after tax and that was welded. Clamping would have costed me only $100 and would have taken even less time.

The mod took about an hour.

Shaun

Blacktip · 10-14-2011, 12:20 PM

Quote:

Originally Posted by Jaime068

How much did u guys pay for those who got it done?

looks like your close to Extreme Performance in palm city. Try calling them, just don't hold your breath waiting for response

.....

I have gotten quotes any where from $80-$150

KMPrenger · 10-14-2011, 01:11 PM

This has been asked in other thread concerning this topic but I'll askit again here and see what you guys say:

Anyone notice any more in-cabin drone with the resonators deleted?

Jaime068 · 10-14-2011, 07:08 PM

Quote:

Originally Posted by Blacktip

looks like your close to Extreme Performance in palm city. Try calling them, just don't hold your breath waiting for response

.....

I have gotten quotes any where from $80-$150

I did yesterday and I got quoted $150 or less(depending on how big of a stainless steel piece they need to order) I have a gift certificate for their shop but I'm deciding whether to use it for the res delete or towards my interior lighting mods? Lol

LoneStar · 10-14-2011, 07:54 PM

I got my resonators deleted for $75, welded on. Took them 30-40 minutes.

It allows WOT to be louder, but I didn't notice any increase in drone.

trooper182 · 10-14-2011, 08:21 PM

paid 60 dollars last week. they welded it on

DJ ATOMIX · 10-15-2011, 10:19 AM

Quote:

Originally Posted by KMPrenger

This has been asked in other thread concerning this topic but I'll askit again here and see what you guys say:

Anyone notice any more in-cabin drone with the resonators deleted?

As I've said before, for me drone is noticeably reduced. The key areas I noticed this was from cabin vibrations. Before the resonator delete, I got this terrible cabin vibration. It sounded like one of the C pillers was vibrating or the rear seat or something.

After the resonator delete, I no longer have the annoying vibrations I used to have. Letting off the gas peddle now when in 2nd or 3rd gear now sounds alot smoother as well.

Again, the only negative I have to say is that little bit of rasp you can hear when the engine is cold. Its annoying and loud and you hear it in the 2500-4000rpm range. After about 5min of driving, its perfect and goes away.

EDIT: And nothing beats the nice volume increase you get when you gun it and it sounds good!

. The diff in volume is about like going from MRT 2 to MRT 1 if you were to compare the two exhausts side by side.

I would love to hear how the delete sounds on the Magnaflow. Every exhaust does differant things when you cut out these things.

Shaun

Jaime068 · 10-15-2011, 10:50 AM

Quote:

Originally Posted by DJ ATOMIX

As I've said before, for me drone is noticeably reduced. The key areas I noticed this was from cabin vibrations. Before the resonator delete, I got this terrible cabin vibration. It sounded like one of the C pillers was vibrating or the rear seat or something.

After the resonator delete, I no longer have the annoying vibrations I used to have. Letting off the gas peddle now when in 2nd or 3rd gear now sounds alot smoother as well.

Again, the only negative I have to say is that little bit of rasp you can hear when the engine is cold. Its annoying and loud and you hear it in the 2500-4000rpm range. After about 5min of driving, its perfect and goes away.

EDIT: And nothing beats the nice volume increase you get when you gun it and it sounds good!

. The diff in volume is about like going from MRT 2 to MRT 1 if you were to compare the two exhausts side by side.

I would love to hear how the delete sounds on the Magnaflow. Every exhaust does differant things when you cut out these things.

Shaun

Are you talking about that vibration thats sounds as if ur rear seat is loose in the back? If so I also hear it at times and it is annoying -_______-

DJ ATOMIX · 10-15-2011, 11:27 AM

Quote:

Originally Posted by Jaime068

Are you talking about that vibration thats sounds as if ur rear seat is loose in the back? If so I also hear it at times and it is annoying -_______-

Yeah that noise, I dont have it anymore. I got used to the noise over summer and not having it now makes a world of differance for in cabin noise. I still get that loud hum (drone) but its not as powerful as before.

I can also now confirm that highway driving is quieter from doing the resonator delete. Since drone has been reduced, the hum isnt quite as loud when I'm at 110kmph (2000rpm).

Shaun

Dcmaro28 · 10-15-2011, 01:08 PM

40 bucks for me

10-13-2011, 11:23 AM	#1
Jaime068 Treasure Coast Camaro 5 Drives: 2010 Camaro 1LT/RS RJT Join Date: Aug 2010 Location: Fort Pierce, Florida Posts: 1,317 View My Garage	How much for a resonator delete? How much did u guys pay for those who got it done? __________________

10-13-2011, 02:21 PM	#2
Jaime068 Treasure Coast Camaro 5 Drives: 2010 Camaro 1LT/RS RJT Join Date: Aug 2010 Location: Fort Pierce, Florida Posts: 1,317 View My Garage	bump __________________

10-13-2011, 02:31 PM	#3
squirell Drives: 2011 1LT Join Date: Aug 2011 Location: Boca Raton, FL Posts: 45	My guy charged $80..still quiet under light acceleration ,but the growl comes on louder and earlier under heavier and full throttle. I very happy with this little mod,sounds great when your on it. __________________ Govt Slave 2011 1LT 1970 Chevelle SS-454 LS-6 (the real LS-6) 1967 442 conv (clone)

10-13-2011, 02:52 PM	#4
Jaime068 Treasure Coast Camaro 5 Drives: 2010 Camaro 1LT/RS RJT Join Date: Aug 2010 Location: Fort Pierce, Florida Posts: 1,317 View My Garage	what exhaust do u have on your camaro? __________________

10-14-2011, 12:03 PM	#5
DJ ATOMIX << CRAZY BEE >> Drives: 400HP 2LT/RS Join Date: Apr 2009 Location: Alberta Posts: 1,156	Mine costed me $166 after tax and that was welded. Clamping would have costed me only $100 and would have taken even less time. The mod took about an hour. Shaun __________________ CRAZY BEE - IOM 2LT/RS (more) Cosmetic Mods - 24 \| Performance Mods - 14 ROTO-FAB CAI - DT HEADERS - CUSTOM 3-INCH PIPE EXHAUST - RES DEL - R-CATS DEL - MAGNAFLOW RES X-PIPE - 91 OCTANE TUNE - FULL ADM KIT - PORTED IM - PORTED TB - PORTED CH - BLACK 3/8 ISOLATOR - TRIFECTA TUNED

10-14-2011, 01:11 PM	#7
KMPrenger Drives: 16 Camaro SS, 15 Colorado Join Date: May 2009 Location: Jefferson City, Missouri Posts: 13,948	This has been asked in other thread concerning this topic but I'll askit again here and see what you guys say: Anyone notice any more in-cabin drone with the resonators deleted? __________________ 2016 Camaro 1SS - 8-speed - NPP - Black bowties 2010 Camaro 1LT V6 (Sold. I will miss her!)

10-14-2011, 07:54 PM	#9
LoneStar Drives: 2011 IOM Camaro Join Date: Jul 2010 Location: Texas Posts: 3,446	I got my resonators deleted for $75, welded on. Took them 30-40 minutes. It allows WOT to be louder, but I didn't notice any increase in drone. __________________

10-14-2011, 08:21 PM	#10
trooper182 Drives: 2011 Camaro 1LT yellow non RS Join Date: May 2011 Location: Louisiana Posts: 691	paid 60 dollars last week. they welded it on __________________ Staff Sergeant U.S. Army 13B Gun Bunny. 2011 Camaro 1LT A6 Mods: Pypes bomb V8 exhaust, Magnaflow x-pipe, resonator delete, Roto-Fab cold air intake, Vmax Black Ice-olator, Elite Engineering catch can, painted engine cover and fuse box cover, 3dCarbon Front Fender Vents, Street Scene Front Splitter, ZL1 Side Rockers, Anvil Notch Rear Spoiler, interior/engine bay LED lights, two JL Audio W3's 10" and 1000w kenwood amp

10-15-2011, 01:08 PM	#14
Dcmaro28 Drives: 2011 LS CGM / '01 Trans am (ls6) Join Date: Jul 2011 Location: Kansas city, MO Posts: 84 View My Garage	40 bucks for me