Thanks PQ! - Page 2 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

armysig · 09-08-2010, 10:58 PM

ARRRRRGGGGHHHHH You 2 have just made me buy the IOM trim kit. EVIL, EVIL I SAY!!!!

But well worth it.

IOM Trim kit.

Quote:

Originally Posted by MyIBMssRS

That looks great! I want to get the silver ice trim for my interior. How difficult is the install?

I have had my door trim off, it's not that hard. You just have to know where the screws are, and have a second person help when putting it back on to hold it while you attach the door lever rod.

se7en · 09-09-2010, 04:41 AM

Looks so much better!

PQ your not as bad as everyone on here says you are......

JoeP@TeamBeckyD · 09-09-2010, 04:56 AM

That looks great and I agree the factory should have done them this way. I did my Summit White and it looks awesome. Nice job!!

PQ? Great guy.

pincoin · 09-09-2010, 05:02 AM

That looks great!

infernoinandout · 09-09-2010, 05:04 AM

what did pq put in its place?

Scott@Bjorn3D · 09-09-2010, 05:15 AM

He is doing leather stuff if I remember correctly.

I am very glad to call PQ a buddy of mine. He helps alot of folks out, Kathie, Stephanie, Zac and I are going down to stay the weekend with him and Bonnie soon. They are doing more work on Stephanie's hair.

Camaro_hx · 09-09-2010, 05:31 AM

niCe one PQ... what u got for me? lol jokes.

myold88 · 09-09-2010, 09:48 AM

[QUOTE=herkman;2310920]When I ordered my IOM 2SS, I figured that an IOM interior would be too much orange. Well, after seeing all those IOM interior cars out there I was pretty dissapointed about not ordering it. I figured one day that I would find one in a junkyard. Well Randy (PQ) sent me his old panels and I owe him big time! I think it's the way GM should have made the car.....whatever exterior color you have, your panels should match. I am happy without having the IOM seats and stitching now.

You are so correct. My IO interior with summit white is great but I always thought the IO exterior and IO interior was a bit too much color. Your car is now perfect and just the way GM should have offered it in my opinion.
This is one of the best mods I've seen on camaro5.

Dr Jkel · 09-09-2010, 10:30 AM

It is nice to see people helping people, especially in this day and time. Randy is a stand up guy.

PQ · 09-09-2010, 10:48 AM

Quote:

Originally Posted by MyIBMssRS

That looks great! I want to get the silver ice trim for my interior. How difficult is the install?

Here is an install vid. Not hard at all.

http://www.camaro5.com/forums/showpo...10&postcount=1

Quote:

Originally Posted by armysig

I have had my door trim off, it's not that hard. You just have to know where the screws are, and have a second person help when putting it back on to hold it while you attach the door lever rod.

Did it myself. Pretty easy. I showed in the video how easy it is to hold the door panel and attach the rest with one hand.

The panels have to be grinded off. Kind of a pain.

Quote:

Originally Posted by se7en

Looks so much better!

PQ your not as bad as everyone on here says you are......

I might be.

Quote:

Originally Posted by BeckyD@RodgersChevrolet

PQ? Great guy.

Quote:

Originally Posted by infernoinandout

what did pq put in its place?

I added some leather ones.

http://www.camaro5.com/forums/showpo...10&postcount=1

Quote:

Originally Posted by Camaro_h

niCe one PQ... what u got for me? lol jokes.

.........Hmmmmm...............

OH.... I know...... Got an extra set of factory lug nuts......

herkman · 09-09-2010, 10:49 AM

I would say it's a simple DIY but I have done all my own mods except for cam and underdrive pulley. The hardest parts were getting the cover plate off of the door pull bolt and there is one plastic rivet that is near the top of the panel that you have to be careful grinding due to it being close to the light tube. I used a Black & Decker mini dremel with a small cut off disk for the job.

.

PQ · 09-09-2010, 10:54 AM

Quote:

Originally Posted by herkman

I would say it's a simple DIY but I have done all my own mods except for cam and underdrive pulley. The hardest parts were getting the cover plate off of the door pull bolt and there is one plastic rivet that is near the top of the panel that you have to be careful grinding due to it being close to the light tube. I used a Black & Decker mini dremel with a small cut off disk for the job.

.

I think I had just the right tool for the door pull plate. lol Came right off. Or else I have one that's just loose already.

khislop007 · 09-09-2010, 09:18 PM

Looks awesome. I think that's the way it should have been from factory. The orange seats looks over done IMHO.....Sorry PQ

09-09-2010, 05:02 AM	#18
pincoin Camaro owner since 1982 Drives: 2012 Camaro 2SS-RS Conv IBM L99 Join Date: Jul 2009 Location: PA Posts: 1,651	That looks great! __________________ 2012 Camaro RS-SS Conv IBM, L99 1968 Camaro RS Coupe 327 AT 1968 Camaro RS-SS Conv, sold 1993

09-09-2010, 05:04 AM	#19
infernoinandout Drives: 2010 camaross/rs Join Date: Jan 2009 Location: buffalo Posts: 461	whats in pqs now what did pq put in its place?

09-09-2010, 09:48 AM	#22
myold88 Drives: SUMMIT WHITE 2SS/RS CAMARO Join Date: Feb 2008 Location: 2018: Lakewood Ranch, Fl. Posts: 8,113 View My Garage	[QUOTE=herkman;2310920]When I ordered my IOM 2SS, I figured that an IOM interior would be too much orange. Well, after seeing all those IOM interior cars out there I was pretty dissapointed about not ordering it. I figured one day that I would find one in a junkyard. Well Randy (PQ) sent me his old panels and I owe him big time! I think it's the way GM should have made the car.....whatever exterior color you have, your panels should match. I am happy without having the IOM seats and stitching now. You are so correct. My IO interior with summit white is great but I always thought the IO exterior and IO interior was a bit too much color. Your car is now perfect and just the way GM should have offered it in my opinion. This is one of the best mods I've seen on camaro5. __________________

09-09-2010, 10:49 AM	#25
herkman Drives: 2010 IOM SS/RS, 69 Camaro Join Date: Nov 2008 Location: Douglasville, Georgia Posts: 563	I would say it's a simple DIY but I have done all my own mods except for cam and underdrive pulley. The hardest parts were getting the cover plate off of the door pull bolt and there is one plastic rivet that is near the top of the panel that you have to be careful grinding due to it being close to the light tube. I used a Black & Decker mini dremel with a small cut off disk for the job. . __________________ R6P - Kooks 1-7/8 Catted LT Headers, Roto-Fab CAI, MGW Shifter, Revolution SS Front Spoiler, Unrestricted Motorsports Rear Spoiler, Razzi Side and Rear EFX, Heritage Grill, Hawk HPS Pads, G2 Matched Calipers, SAV-3 Wheels, Vengeance Racing Stage II Cam 227/239.614/.624 115+3, 25% Underdrive Pulley, Oil Catch Can, 461 RWHP - 420 Torque

09-09-2010, 09:18 PM	#27
khislop007 ZEUSS Drives: Hard! Join Date: Sep 2008 Location: Cayman Islands Posts: 2,567 View My Garage	Looks awesome. I think that's the way it should have been from factory. The orange seats looks over done IMHO.....Sorry PQ __________________

09-09-2010, 04:41 AM	#16
se7en Drives: 10 Procharged SS Join Date: Oct 2009 Location: The creek at the end of the dead end road Posts: 1,857	Looks so much better! PQ your not as bad as everyone on here says you are......

09-09-2010, 04:56 AM	#17
JoeP@TeamBeckyD Drives: SS,PaceCar,ZL1,1LE,C7Z51,Z06,17-ZL1 Join Date: Jun 2009 Location: Detroit, Mich Posts: 68,623	That looks great and I agree the factory should have done them this way. I did my Summit White and it looks awesome. Nice job!! PQ? Great guy.

09-09-2010, 05:15 AM	#20
Scott@Bjorn3D Drives: Kami, 2013 2SS LS3 Luvin Join Date: Oct 2008 Location: Eufaula, Alabama Posts: 6,427	He is doing leather stuff if I remember correctly. I am very glad to call PQ a buddy of mine. He helps alot of folks out, Kathie, Stephanie, Zac and I are going down to stay the weekend with him and Bonnie soon. They are doing more work on Stephanie's hair.

09-09-2010, 05:31 AM	#21
Camaro_hx Account Suspended Drives: 2010 1LT/RS CGM Join Date: Sep 2009 Location: KWT Posts: 2,474 View My Garage	niCe one PQ... what u got for me? lol jokes.

09-09-2010, 10:30 AM	#23
Dr Jkel and MR. HYDE Drives: 2010 2SS RJT/BLK 6Spd Man Join Date: May 2009 Location: Oxford, Alabama Posts: 4,375	It is nice to see people helping people, especially in this day and time. Randy is a stand up guy.