this would look really cool for the dash and doors - Page 11 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Cody2399 · 12-21-2012, 04:08 PM

Just ordered my writes maxiCord red piping will post pics when I finish

camfast · 12-25-2012, 02:06 PM

im digging the interior guys nice work.

a.morblu · 12-26-2012, 09:07 AM

I love when old threads pop up that I had no clue ever existed. I'll be trying this out when it gets a little bit warmer!!

supercharged zl1 · 12-26-2012, 09:12 AM

YEAH

MjrStfy · 07-29-2015, 11:04 PM

Sub'd sorry know its old but spent a few days trying to find the thread lol

Linker239 · 08-02-2015, 12:36 AM

I did this mod last night, it took me several hours. It really changes the look of the entire interior. I used something that I though worked rally well. I had a stripe applicator and some guitar picks. I would wedge the stripe applicator between panels, and i would slide the guitar picks underneath the panel to get the desired height to tuck the piping in. I used just some cheap fender medium-heavy picks, they did not break or warp. I used a slimmer medium pick for just the right amount of spacing, it however was warped by the time I got done. But the picks didn't get chewed up, excessively warped or flex, and I didn't have to cut up any credit cards.

mikescamaro12 · 08-07-2015, 10:34 AM

the 14 door panels are really tight , any help would be greatly appreciated ,,

TonyNo · 09-10-2017, 10:40 AM

Years later (and after trading the '10 in) I find these. Should hold up a lot better than the cloth piping.

http://www.ebay.com/itm/16-FT-Blue-S...l/201579372485

jokrz187 · 09-12-2017, 11:12 AM

I am gonna have to try this

jokrz187 · 11-02-2017, 06:55 AM

So I found this on Amazon and gave it a go.
https://www.amazon.com/gp/aw/s/ref=i...Automobile+Car

I bought two for just in case and I'm glad I did. You can get by with one but two just in case. The only issue is there were no instructions with it but it's simple to figure out. Around the controls on the door is a good gap and it's not snug in there unless you push it in a bit more. I may try to find glue to use.

12-26-2012, 09:07 AM	#143
a.morblu Drives: 2011 Sinister SS Join Date: Jul 2011 Location: Circle City Posts: 489 View My Garage	I love when old threads pop up that I had no clue ever existed. I'll be trying this out when it gets a little bit warmer!! __________________

08-02-2015, 12:36 AM	#146
Linker239 Drives: 2022 WC 2SS Join Date: Jan 2011 Location: Searcy, Arkansas Posts: 2,466 View My Garage	I did this mod last night, it took me several hours. It really changes the look of the entire interior. I used something that I though worked rally well. I had a stripe applicator and some guitar picks. I would wedge the stripe applicator between panels, and i would slide the guitar picks underneath the panel to get the desired height to tuck the piping in. I used just some cheap fender medium-heavy picks, they did not break or warp. I used a slimmer medium pick for just the right amount of spacing, it however was warped by the time I got done. But the picks didn't get chewed up, excessively warped or flex, and I didn't have to cut up any credit cards. __________________ Current 2022 Wild Cherrry 2SS; Recaros, NPP, 5 Split Spoke Polished Rims, Satin Black Package Ordered 7-11-2023 1100: Riptide Blue 2SS, Not Built 2023 Red Hot 1LT RS V6; Sold 2010 VR 1LT RS; Sold

08-07-2015, 10:34 AM	#147
mikescamaro12 Drives: 2014 chevy camaro 2lt RS Join Date: Nov 2013 Location: virginia beach, va Posts: 241 View My Garage	the 14 door panels are really tight , any help would be greatly appreciated ,, __________________ GMG1(SW) usn ret Battleship sailor

09-10-2017, 10:40 AM	#148
TonyNo Drives: 2016 2SS, SW Join Date: Oct 2009 Location: Chicago Suburbs Posts: 1,079	Years later (and after trading the '10 in) I find these. Should hold up a lot better than the cloth piping. http://www.ebay.com/itm/16-FT-Blue-S...l/201579372485 __________________

09-12-2017, 11:12 AM	#149
jokrz187 Drives: 2015 1SS Join Date: Jun 2017 Location: Stafford, VA Posts: 402 View My Garage	I am gonna have to try this __________________ ------------------------------------------------------- Custom TSP Stage 2 Cam/GPI intake Ported Rod Mod /VARARAM CAI/Mishimoto Catch Can/1 LE front & rear sway bars/ engine cover/fuse box custom painted, strut tower brace, Texas Speed LT, Hi Flo Cats, Magnum Tru-X pipe, NGK Spark Plugs, PCM Spark Plug Wire, Painted Calipers, CF Spoiler w/wicker bill.

12-21-2012, 04:08 PM	#141
Cody2399 Drives: 2014 Camaro 2SS, 2004 Dodge Ram 150 Join Date: Dec 2012 Location: Oregon Posts: 574	Just ordered my writes maxiCord red piping will post pics when I finish

12-25-2012, 02:06 PM	#142
camfast Drives: 2012 camaro convertable Join Date: Dec 2012 Location: raleigh Posts: 20	im digging the interior guys nice work.

12-26-2012, 09:12 AM	#144
supercharged zl1 Drives: '13 camaro zl1 '08 daytona charger Join Date: Dec 2012 Location: san diego Posts: 3,176	YEAH

07-29-2015, 11:04 PM	#145
MjrStfy Drives: 2015 Chevy Camaro V6 2LT RS Join Date: Jul 2015 Location: SoCal Posts: 113 View My Garage	Sub'd sorry know its old but spent a few days trying to find the thread lol

11-02-2017, 06:55 AM	#150
jokrz187 Drives: 2015 1SS Join Date: Jun 2017 Location: Stafford, VA Posts: 402 View My Garage	So I found this on Amazon and gave it a go. https://www.amazon.com/gp/aw/s/ref=i...Automobile+Car I bought two for just in case and I'm glad I did. You can get by with one but two just in case. The only issue is there were no instructions with it but it's simple to figure out. Around the controls on the door is a good gap and it's not snug in there unless you push it in a bit more. I may try to find glue to use. Attached Images __________________ ------------------------------------------------------- Custom TSP Stage 2 Cam/GPI intake Ported Rod Mod /VARARAM CAI/Mishimoto Catch Can/1 LE front & rear sway bars/ engine cover/fuse box custom painted, strut tower brace, Texas Speed LT, Hi Flo Cats, Magnum Tru-X pipe, NGK Spark Plugs, PCM Spark Plug Wire, Painted Calipers, CF Spoiler w/wicker bill.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY Dash and Door trim for under $30	Darth Martel	Camaro DIY & HOW-TO instructions & discussions	29	09-15-2010 06:49 AM
WANTED: INTERIOR TRIM (doors and dash)	Red67Stang	Interior Parts & Accessories	1	03-07-2010 07:58 AM
Factory dash ABL?	bkwagonss	5th Gen Camaro SS LS LT General Discussions	3	09-17-2009 10:41 AM
Question about fabric panels on doors and dash.	THUMPER20X	Cosmetics and Lighting Modification Discussions	0	09-06-2009 10:47 AM
protectant/shine for dash doors and console ?	D1BADZ	Cosmetic Maintenance: Washing, Waxing, Detailing, Bodywork, Protection	4	07-02-2009 03:53 PM