Official 1/4 Mile (V8) 2010+ Camaro Fast List

[Mr. Nasty]

New to the list. 2010 engine L99,A6 Modefications- Supercharger/ Whipple, Cam, LT , exhaust, CAI. converter 20" DR

[flyby]

First time out with the new setup, did a few shakedown passes, more to come.
Car is 2010 ss with heads, cam, headers, dss 9in, procharger, STOCK bottom end, 4l80e on 20 inch drag radials and stock front tires on stock rims. Car is street registered and drove day after tracked 80 miles round trip to work.
Rules:
In proposing submissions for inclusion on the list, please follow these simple rules
#1. Post the details of your quarter-mile pass using this template: (cut and paste)
Tires used on the pass: 20" Mickey Thompson ET Street Radial rear 20" Pirelli P Zero fronts on stock rims
Performance Mods (if any): Heads/Cam/Headers/DSS 9in/4l80e/Procharger F-1D on a 5in pulley (about9 psi)
Category submitted for: Please List the Category or Category # 6) Camaro SS, Power Adders Stock Displacement (Street Registered)
R/T..........2.296
60'.............1.618
330'...........4.417
660'...........6.734
660’ mph...106.36
1000'..........8.758
1320'..........10.465
1320’ mph…130.23
Name of the track:Atco Raceway
Date of pass:12/13/12
Weather conditions: (include Density Altitude, if known):clear/temp low 40's/track temp 49

car also has full cage and interior with corbeau racing front seats with 5 point harness actual weight well over stock
had 3/4 tank of gas and non lock on the torque converter leaving on footbrake

car went 10.465 @ 130.23 see attachment for copy of slip.

aaa1.doc

[MANNYS2SS/RS]

Originally Posted by flyby

First time out with the new setup, did a few shakedown passes, more to come.
Car is 2010 ss with heads, cam, headers, dss 9in, procharger, STOCK bottom end, 4l80e on 20 inch drag radials and stock front tires on stock rims. Car is street registered and drove day after tracked 80 miles round trip to work.

car went 10.465 @ 130.23 see attachment for copy of slip.

Attachment 452520

Awesome!!!!

[The Baron]

I.m.o.p when a shop works and races and pushes the envelope on new parts so we know what works and doesn't BEFORE we shell out the big bucks and also supports a board through sponsorship they should be treated with a little more respect.

There is a differents in my mind between a sponsor that does this and one that just pays money so they can push parts and make money off the boards users.

[GQ4Life]

Originally Posted by flyby

First time out with the new setup, did a few shakedown passes, more to come.
Car is 2010 ss with heads, cam, headers, dss 9in, procharger, STOCK bottom end, 4l80e on 20 inch drag radials and stock front tires on stock rims. Car is street registered and drove day after tracked 80 miles round trip to work.
Rules:

car went 10.465 @ 130.23 see attachment for copy of slip.

Nice and on on stock bottom end

[mlee]

Originally Posted by The Baron

I.m.o.p when a shop works and races and pushes the envelope on new parts so we know what works and doesn't BEFORE we shell out the big bucks and also supports a board through sponsorship they should be treated with a little more respect.

There is a differents in my mind between a sponsor that does this and one that just pays money so they can push parts and make money off the boards users.

You're actually selling these guys short. They do more for this board that just that. They bascially rule this part of the forum with the fastest cars out there in addition to putting up the cash awards at the fest. All the respect goes their way.

Merc also spends a ton of time keeping these lists straight. Don't think you guys realize what he's done here.

Just having open discussions on how we rack and stack classes. No need to pull the respect card.

[dekan513]

submit for internal stock cubes
R/T........... .9831
60'............. 1.8791
330'...........5.2387
660'...........7.9594
660’ mph...90.76
1000'..........
1320'..........12.2240
1320’ mph…114.13
Name of the track: london dragway
Date of pass:12/15/12
Weather conditions: (include Density Altitude, if known):731


mods its a m6
obx 1 7/8 headers , magnaflow catback, k&n intake , bluecat tune, lg g6x3 cam, stock tires
on this pass i was n/a.
i tried to spray it on the next pass and clutch wouldnt take it . so no spray on this run.

[Rockit_z28]

Big thanks to Heintz Racing for all their help. I still expect an 11.75 pass in the near future. FYI – The cam is a baby compared to what guys are running today.

This run backed up our run earlier in the day of 11.84. I love a consistent car.

Tires used on the pass: 17" M/T ET Streets - Drag Radial and Skinnies
Performance Mods (if any): Cam, Long Tubes, 3.70 Gear, Converter, Tune, 17” Weld Wheels, full BMR Suspension
Category submitted for: Internal Modification Stock Displacement
R/T.......... .285
60'............. 1.643
330'........... 4.877
660'........... 7.553
660’ mph... 93.12
1000'.......... 0.000
1320'.......... 11.826
1320’ mph… 115.17
Name of the track: Darlington Dragway
Date of pass: 12-15-2012
Weather conditions: Overcast 54
DA: -198
Race Weight with Driver = 4,160 pounds

[Stephen12ZL1]

Originally Posted by Stephen12ZL1

Performance Mods (if any):
Category submitted for: Please List the Category or Category # 10
R/T.......... .509
60'............. 1.592
330'........... 4.593
660'........... 7.079
660’ mph... 98.98
1000'.......... 9.227
1320'.......... 11.036
1320’ mph… 123.85
Name of the track: MIR
Date of pass: 11/17/2012
Weather conditions: (include Density Altitude, if known): -800ft
Modifications: CAI, 9.55 Lower Pulley, Heat Exchanger, 90mm TB, DR, Tune

Is the OP going to include my time on the list...category 10....thanks

[Stephen12ZL1]

post 1848 has the pic of the slip

[ginsberg2@hotmail.com]

Originally Posted by RPM Transmissions

Half the cars on this site aren't driven more than a couple thousand miles per year, so what does it matter if ours isn't street driven daily? And there is no point having the car registered during the winter here in Indiana.... Our car is no different than half the cars on this list.

i'm not sure about your car being no different than the others...you have aluminum connecting rods, not a very streetable item.

ps, i love the tranny you built me...top notch.

[NickJRE]

Place holder for numbering. Post removed - mlee

[NickJRE]

Whoops

[CamaroSS45]

Originally Posted by NickJRE

Whoops

Super nice run..... Nick is their a build profile on this car somewhere? Great run!!!