ADM / Magnaflow 3" system for the ARH Catted system - Pics and thoughts - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Crowley · 09-15-2009, 05:50 PM

I'll try to get some sound files up as soon as I can, but so far so go. With the ARH catted system and stock catback, it sounded pretty good, but was a little too high pitched and popped a good bit on decel. With the magnaflow system, it sounds AWESOME! It brings it down to a nice low rumble and when you get on it, it gets nice and loud with none of the high pitched rasp of the stock axelback. It has helped quite a bit with the decel pops as well. You get a little decel rumble but none of the BANG backfire pops that I had heard before

Anyway .. on to the pics .. I'll update with video as soon as I can. The car / catback is a bit dirty since we have been having rain here since last Thursday so please be gentle

. If you have been on the fence about doing this .. do it, you won't be dissapointed!

Edit .. updated with Video .. last rev was to about 4.3k

This is the same system that ADM posted up a little while ago. It replaces the ARH Xpipe and uses the complete 3" system from Magnaflow.

Crowley

freemaSSon · 09-15-2009, 06:55 PM

Got to hear it for myself. OMG this is the sound. It is a really really nice deep tone and under power it is the most beautiful sound.

NAHURRY · 09-15-2009, 07:06 PM

correct me if I'm wrong but shouldnt the 3' system only be used if you were
going to make atleast 500 RWHP....Wouldnt it hurt bottom end torque?

Thanks

chappy48 · 09-15-2009, 07:13 PM

Quote:

Originally Posted by NAHURRY

correct me if I'm wrong but shouldnt the 3' system only be used if you were
going to make atleast 500 RWHP....Wouldnt it hurt bottom end torque?

Thanks

That's what I've heard too. Haven't seen any dyno's to prove it though. And you'd probably still gain over stock, but maybe not as much as a 2.5" system.

Ject · 09-15-2009, 07:14 PM

Need video o.O

69Bird · 09-15-2009, 07:21 PM

Crowley is over 500 horses as it is.

Crowley · 09-15-2009, 08:36 PM

Quote:

Originally Posted by NAHURRY

correct me if I'm wrong but shouldnt the 3' system only be used if you were
going to make atleast 500 RWHP....Wouldnt it hurt bottom end torque?

Thanks

Remember .. this is the system ADM is mating to the ARH system which is 3".

Crowley

Mimo · 09-15-2009, 08:51 PM

Crowley, what are you running? If I am not mistaken I think we may be near the same - just picked her up tonite with the Maggie installed - also running ARH LT/Stock muffs with the K&N/Hennessey CAI - with Hotchkis.

Really curious to know the difference with the magnaflow addition

Andro · 09-15-2009, 08:57 PM

Nice set up Crowley, I had the 3" magnaflow on my car at first but we decided to go with the kooks 3" all the way just because I had the kooks headers too. Personaly I like the sound of the magnaflow. Good choice

Crowley · 09-15-2009, 09:12 PM

Video update ..

Please disregard my son

.. I was running late so I put this together quickly .. I'll try for some better video / audio very soon ! Last rev was about 4.3k.

Crowley

Mimo · 09-15-2009, 09:15 PM

your son sounds like my little guy - i bet he covers his ears when he tells you to stop also.

Anyhow, sounds great and still keeps a bit of the chirp at the peak - will consider thanks to this vid.

Crowley · 09-15-2009, 09:19 PM

Quote:

Originally Posted by Mimo

your son sounds like my little guy - i bet he covers his ears when he tells you to stop also.

Anyhow, sounds great and still keeps a bit of the chirp at the peak - will consider thanks to this vid.

Lol .. yep .. he is great ...

I really need to get some in car video (sound) and then a trailing car to video me doing some drive by for the exhaust sound under load. The video I think sounds good, but I'd like to get some other videos to show just how good .. lol

Crowley

sav1 · 09-15-2009, 10:13 PM

Lol.. Don't do any more.. It's scares me too. Nice set up

khislop007 · 09-15-2009, 11:45 PM

Can't wait til i get my car to scare my two little boys. 2 more weeks

As soon as I get her home my ARH LT's and Borlas are going on!

Sounds good

09-15-2009, 05:50 PM	#1
Crowley Okie doke Drives: 2012 GT500 Join Date: Sep 2008 Location: McKinney Texas Posts: 3,568 View My Garage	ADM / Magnaflow 3" system for the ARH Catted system - Pics and thoughts I'll try to get some sound files up as soon as I can, but so far so go. With the ARH catted system and stock catback, it sounded pretty good, but was a little too high pitched and popped a good bit on decel. With the magnaflow system, it sounds AWESOME! It brings it down to a nice low rumble and when you get on it, it gets nice and loud with none of the high pitched rasp of the stock axelback. It has helped quite a bit with the decel pops as well. You get a little decel rumble but none of the BANG backfire pops that I had heard before Anyway .. on to the pics .. I'll update with video as soon as I can. The car / catback is a bit dirty since we have been having rain here since last Thursday so please be gentle . If you have been on the fence about doing this .. do it, you won't be dissapointed! Edit .. updated with Video .. last rev was to about 4.3k This is the same system that ADM posted up a little while ago. It replaces the ARH Xpipe and uses the complete 3" system from Magnaflow. Crowley __________________ Last edited by Crowley; 09-15-2009 at 09:14 PM.

09-15-2009, 06:55 PM	#2
freemaSSon Pat @ ADM PERFORMANCE Drives: CGM SS/RS M6 Join Date: Aug 2009 Location: Prosper, TX Posts: 506	Got to hear it for myself. OMG this is the sound. It is a really really nice deep tone and under power it is the most beautiful sound. __________________ "old age and treachery will always overcome youth and ambition" author unknown "There are two types of racers: cheaters...and losers." Smokey Yunick

09-15-2009, 07:14 PM	#5
Ject aka Patrick Drives: '10 Camaro 2SS '04 Silverado Join Date: Jan 2009 Location: Derby Kansas Posts: 3,072	Need video o.O __________________ Current Modifications: Your average Bolt-ons & Suspension Upgrades GForce Engineering: 9" Rear End, Strange Pro Iron Case w/Moser Nodular 3.70:1 Detroit locker, 3.5" Solid Drive Shaft

09-15-2009, 07:21 PM	#6
69Bird Drives: 1969 Firebird, 2010 Camaro SS Join Date: Jul 2009 Location: Spring Lake NC Posts: 226	Crowley is over 500 horses as it is. __________________ 2SS RS CGM LS3, 11.97@119mph with Pirelli lined fender wells

09-15-2009, 08:57 PM	#9
Andro NOICE!!! ™ Drives: Force Fed 427 Join Date: Jan 2009 Location: GOT BOOST? Posts: 5,214 View My Garage	Nice set up Crowley, I had the 3" magnaflow on my car at first but we decided to go with the kooks 3" all the way just because I had the kooks headers too. Personaly I like the sound of the magnaflow. Good choice __________________

09-15-2009, 07:06 PM	#3
NAHURRY Love's to Detail Drives: 2010 SS,97silverado/08crewcab Join Date: Oct 2008 Location: Greenville SC. Posts: 1,421	correct me if I'm wrong but shouldnt the 3' system only be used if you were going to make atleast 500 RWHP....Wouldnt it hurt bottom end torque? Thanks

09-15-2009, 08:51 PM	#8
Mimo Member Drives: '10 2SSRS 09 Silverado - 10 GLK 350 Join Date: Apr 2009 Location: Sudbury Posts: 50	Crowley, what are you running? If I am not mistaken I think we may be near the same - just picked her up tonite with the Maggie installed - also running ARH LT/Stock muffs with the K&N/Hennessey CAI - with Hotchkis. Really curious to know the difference with the magnaflow addition

09-15-2009, 09:12 PM	#10
Crowley Okie doke Drives: 2012 GT500 Join Date: Sep 2008 Location: McKinney Texas Posts: 3,568 View My Garage	Video update .. Please disregard my son .. I was running late so I put this together quickly .. I'll try for some better video / audio very soon ! Last rev was about 4.3k. Crowley __________________

09-15-2009, 09:15 PM	#11
Mimo Member Drives: '10 2SSRS 09 Silverado - 10 GLK 350 Join Date: Apr 2009 Location: Sudbury Posts: 50	your son sounds like my little guy - i bet he covers his ears when he tells you to stop also. Anyhow, sounds great and still keeps a bit of the chirp at the peak - will consider thanks to this vid.

09-15-2009, 10:13 PM	#13
sav1 Drives: 2009 Corvette Z06 Join Date: Jun 2009 Location: San Diego Posts: 556	Lol.. Don't do any more.. It's scares me too. Nice set up

09-15-2009, 11:45 PM	#14
khislop007 ZEUSS Drives: Hard! Join Date: Sep 2008 Location: Cayman Islands Posts: 2,567 View My Garage	Can't wait til i get my car to scare my two little boys. 2 more weeks As soon as I get her home my ARH LT's and Borlas are going on! Sounds good __________________