Radar Detector Mounting Bracket Interest - Page 7 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

PolishMike · 12-04-2009, 10:01 AM

Hey guys -

I have to go to DC for a couple months in 2 weeks. I will be accepting orders until the middle of next week. These will then be available again in Feb. Please order now if you want one.

dr1ven · 01-07-2010, 03:22 PM

Let us know when you return. Thanks.

Warmart · 01-07-2010, 09:55 PM

Yes, a PM would be nice, though I will try to watch this thread.

SummoneR · 04-17-2010, 12:51 AM

Is this still available? The link is dead. I plan to hard wire my RX65 this weekend and would like to get one of these to replace the suction cups.

Nutbutt · 04-17-2010, 08:39 AM

http://www.southerncarparts.com/cama...nt-p-2653.html

SummoneR · 04-17-2010, 01:22 PM

Quote:

Originally Posted by Nutbutt

http://www.southerncarparts.com/cama...nt-p-2653.html

Thanks Nutbutt, I found that last night but they are asking $14.01 for simple ground shipping. For a small $24 part? ridiculous.

Nutbutt · 04-17-2010, 01:53 PM

I agree, I ended up buying a mirror mount it was cheaper an the shipping was too.

SummoneR · 04-17-2010, 02:07 PM

Quote:

Originally Posted by Nutbutt

I agree, I ended up buying a mirror mount it was cheaper an the shipping was too.

Where did you find that? I saw a thread in here about one but don't recall it mentioning a site or name of the product. And does yours work with Beltronics?

Camaro4Life2011 · 05-18-2011, 06:08 PM

Hey guys I am having a little trouble. Attempting to hardwire the v1. Went to radioshack and they did not have any fuse taps. The v1 comes with a t tap. I was wondering if anyone went that route. Do you need to use invisicord? Thanks guys.

POWERFREAK · 05-18-2011, 07:49 PM

Quote:

Originally Posted by Camaro4Life2011

Hey guys I am having a little trouble. Attempting to hardwire the v1. Went to radioshack and they did not have any fuse taps. The v1 comes with a t tap. I was wondering if anyone went that route. Do you need to use invisicord? Thanks guys.

you don't need to use an invisicord....but it's easier (plugs right into the back of your rear-view mirror).

Klepton · 06-10-2011, 05:30 PM

Quote:

Originally Posted by mlee

Got my Escort 9500 IX from Amazon.com for $430 and installed (passenger side) with this bracket today.
Had to file just a very small bit of plastic from the Visor hold down piece as others have done, but a nice tight fit and the plastic is easy to file.

Snapped perfectly into the Escort slot. It does hang a bit low 3/4" to 1" from the headliner.
I think with a little bending I can get it snug like the picture in post #27

Good job on this one it's a solid piece... Suction Cups simply Suck..

I just did this as well. I ended up purchasing the Camaro Radar Detector Visor Mounting Bracket from Southern Car Parts ($24.99 + $5.00 shipping) and the Escort Radar Detector Stealth Mirror Power Cord from Safe-N-Sound1 ($9.50 shipped) instead of the Invisicord. I installed mine on the driver's side visor and it was a quick and easy install. It looks awesome!

Quote:

Originally Posted by SummoneR

Thanks Nutbutt, I found that last night but they are asking $14.01 for simple ground shipping. For a small $24 part? ridiculous.

Perhaps the shipping was more expensive last year or perhaps it's more expensive to ship to your area. I just purchased this a couple of weeks ago and I only had to pay a $5 Flat Rate for standard shipping.

Quote:

Originally Posted by Camaro4Life2011

Hey guys I am having a little trouble. Attempting to hardwire the v1. Went to radioshack and they did not have any fuse taps. The v1 comes with a t tap. I was wondering if anyone went that route. Do you need to use invisicord? Thanks guys.

As mentioned before, you don't need to use Invisicord but it's a lot easier and you don't have to run a wire down to tap into your fusebox. I went with the stealth mirror cord from Safe-N-Sound1 because it does the exact same thing the Invisicord does but it is a lot cheaper.

12-04-2009, 10:01 AM	#85
PolishMike Drives: 2010 2SS RS Join Date: Jul 2009 Location: Tracy/San Diego CA Posts: 224	Hey guys - I have to go to DC for a couple months in 2 weeks. I will be accepting orders until the middle of next week. These will then be available again in Feb. Please order now if you want one. __________________ IOM w/ White Stripes 2SS RS M6 #17772 Now - Stainless Works 2" Headers, Intake, Cam, tune, ect And shepherds we shall be, For thee my lord for thee. Power has descended forth from thy hand, that our feet may swiftly carry out thy commands. So we shall flow a river forth to thee, and teeming with souls shall it ever be.In nomine Patri, Et Fili, Spiritus Sancti

01-07-2010, 03:22 PM	#86
dr1ven Drives: '10 CGM Join Date: Sep 2009 Location: Raleigh, NC Posts: 174	Let us know when you return. Thanks. __________________ 2SS/RS CGM. Black Int. Black Stripes. Grnd Effects. 1100: 09/1/09 3800: 12/18/09 Picked Up at the Dealership: 1/4/10

04-17-2010, 12:51 AM	#88
SummoneR Paul Drives: '10 2SS/RS M6 "Marauder" Join Date: Mar 2009 Location: NOR*CAL Posts: 6,257	Is this still available? The link is dead. I plan to hard wire my RX65 this weekend and would like to get one of these to replace the suction cups. __________________

04-17-2010, 08:39 AM	#89
Nutbutt Drives: 2011 RJT 2LT/RS Convertible Join Date: Nov 2009 Location: Western Massachusetts Posts: 3,381 View My Garage	http://www.southerncarparts.com/cama...nt-p-2653.html __________________ 1st IPF Supercharged 2011 2LT/RS RJT Convertible

04-17-2010, 01:53 PM	#91
Nutbutt Drives: 2011 RJT 2LT/RS Convertible Join Date: Nov 2009 Location: Western Massachusetts Posts: 3,381 View My Garage	I agree, I ended up buying a mirror mount it was cheaper an the shipping was too. __________________ 1st IPF Supercharged 2011 2LT/RS RJT Convertible

01-07-2010, 09:55 PM	#87
Warmart Drives: 2010 2LT/RS Auto - Black & IO Join Date: Dec 2009 Location: AZ - Maricopa Posts: 40	Yes, a PM would be nice, though I will try to watch this thread.

05-18-2011, 06:08 PM	#93
Camaro4Life2011 Drives: Black Camaro 2LT RS with Sunroof Join Date: Jul 2010 Location: New Jersey Posts: 257 View My Garage	Hey guys I am having a little trouble. Attempting to hardwire the v1. Went to radioshack and they did not have any fuse taps. The v1 comes with a t tap. I was wondering if anyone went that route. Do you need to use invisicord? Thanks guys. __________________ 2011 Blk on Blk 2LT [x] Perma-grin [x]1000 Watt Dual 12'' Subs (******** Harness) [x]Blacked out Bow-ties [x]AACStyle Blue Footwell Lights. [x]AACStyle Blue LED Dome Light. [x]AACStyle Blue LED Trunk Light [x]Knight Rider 54 Blue LED [X]Valentine 1 Hard Wire [X]Valentine 1 Concealed Display [ ]20 %Tinted Windows [ ]LED Underglow [ ]Rear Footwell Lights [ ]ABL Extension [ ]Camaro RS Projection [ ]Painted Calipers [ ]Glove Box Light [ ]Door Handle Lights [ ]Cold Air Inductions CAI [ ]AACStyle Plasma DRL [ ]AACStyle License Plate LEDS

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Need wiring alernative for radar detector	Augie1978	Camaro DIY & HOW-TO instructions & discussions	21	06-15-2013 02:46 PM
front plate bracket dont drill solution	camarossrs2150	5th Gen Camaro SS LS LT General Discussions	55	10-10-2011 06:21 AM
Swift Motorsports Hidden Manual License Plate Bracket Installation	camarolt76	Cosmetics and Lighting Modification Discussions	11	07-13-2009 08:52 PM
Radar detection systems?	DGordon	Audio, Video, Bluetooth, Navigation, Radar, Electronics Forum	68	04-02-2009 09:05 PM
radar and laser detector and jammers	Az Sparky	Off-topic Discussions	49	08-27-2007 10:03 PM