03-15-2012, 09:35 PM | #1 |
Drives: 2010 Camaro Join Date: Feb 2011
Location: CoMo
Posts: 414
|
Ported Throttle body how to??
I was wondering I am seeing alot about ported throttlebody. Has anyone done this as a DIY if so what all is involved, what about the throttle plate ect ect. Thanks
__________________
2010 JL Audio
Build Thread: http://www.camaro5.com/forums/showthread.php?t=139419 #280 MASTER MECP Certified MECP - Sales, Basic and Advance Certified ASE - 6 electrical certified 10+ years car audio installation, sales and manager |
03-15-2012, 09:42 PM | #2 |
|
its easy take off the intake tube...i beleave its four bolts that are connect the tb to the engine...take those off..take off the electrical connector...pull out and reverse the install with the new one...if i remember correctly thats all u need to do...if u have anyquestions pm me...or i can give you my number we can talk on the phone and i can walk u threw it
__________________
top 10 reason why real men drive stick. 10. A manual transmission is the ultimate in control 9. You can use automotive jargon and not sound like a total tool 8. You can't spell "manual" without "man" 7. Manual transmissions prove you can do more than one thing at a time 6. You can't drift in an auto 5. You can't pull fancy moves in an automatic 4. You get better fuel economy with a stick 3. You’ll never look like a chump if you can drive stick 2. Manual transmission cars are faster 1. Women like a guy who is good with his hands. |
03-15-2012, 09:42 PM | #3 |
I want to know too
|
|
03-15-2012, 09:51 PM | #4 |
Drives: 2010 Camaro Join Date: Feb 2011
Location: CoMo
Posts: 414
|
what about actually porting the throttle body not buying a new one that is all ready ported
__________________
2010 JL Audio
Build Thread: http://www.camaro5.com/forums/showthread.php?t=139419 #280 MASTER MECP Certified MECP - Sales, Basic and Advance Certified ASE - 6 electrical certified 10+ years car audio installation, sales and manager |
03-15-2012, 10:04 PM | #5 |
[COTW 4/13/15]
Drives: Supercharged LLT Join Date: Jul 2010
Location: Florida
Posts: 5,957
|
__________________
|
03-16-2012, 07:17 AM | #6 |
Drives: 2011 Camaro 2LT/RS Black Join Date: Nov 2011
Location: Ohio
Posts: 973
|
|
03-16-2012, 07:35 AM | #7 |
Drives: 2017 1SS 6spd Join Date: Jan 2011
Location: Utah
Posts: 2,883
|
If you have access to a CNC machine, a couple of throttle bodies to practice on, and can do before and after flow bench testing- have at it!
If not, you are more likely to create a bottleneck and reduce the performance of your TB, IMHO. Best bet is the ported TB from Rx Performance. |
03-16-2012, 08:33 AM | #8 |
n116
Drives: 2010 2SS YELLOW TRANSFORMER AUTO Join Date: Mar 2010
Location: SAN ANGELO TX
Posts: 633
|
Really simple to replace. On my L99 removed clamps from rubber connector on my cai inc at throttle body. Used a 10mm socket and removed the 4 bolts, disconnected the electrical plug-in. Installed the new throttle body, being careful not to overtighten the 4 bolts, plug in connector and reconnect cold air intake. Note!! TO SELF !! I did not do a good job of reconnecting the rubber cai inc intake hose. Went for a test drive and all was well. Put camaro away for about 2 weeks and the next time I fired her up noticed I had a check engine light. The rubber hose at throttle body had slipped off, reconnected good this time and light went away. I do make some stupid mistakes sometime.
|
03-16-2012, 09:11 AM | #9 |
Drives: 2010 Camaro Join Date: Feb 2011
Location: CoMo
Posts: 414
|
Ok does anyone have any pictures of like a side-by-side of the throttle body stock and the ported one? Showing the difference?
__________________
2010 JL Audio
Build Thread: http://www.camaro5.com/forums/showthread.php?t=139419 #280 MASTER MECP Certified MECP - Sales, Basic and Advance Certified ASE - 6 electrical certified 10+ years car audio installation, sales and manager |
03-16-2012, 09:14 AM | #10 |
Booooosted.
|
|
03-16-2012, 09:17 AM | #11 |
Booooosted.
|
|
03-16-2012, 09:21 AM | #12 |
Drives: 2010 Camaro Join Date: Feb 2011
Location: CoMo
Posts: 414
|
Thanks for the pictures, I like seeing how the changes are done before buying things and if possible doing to my self.
__________________
2010 JL Audio
Build Thread: http://www.camaro5.com/forums/showthread.php?t=139419 #280 MASTER MECP Certified MECP - Sales, Basic and Advance Certified ASE - 6 electrical certified 10+ years car audio installation, sales and manager |
03-16-2012, 09:22 AM | #13 |
Drives: 2010 Camaro Join Date: Feb 2011
Location: CoMo
Posts: 414
|
I wonder if honing stones would work? Any idea how much material is actually taken off?
__________________
2010 JL Audio
Build Thread: http://www.camaro5.com/forums/showthread.php?t=139419 #280 MASTER MECP Certified MECP - Sales, Basic and Advance Certified ASE - 6 electrical certified 10+ years car audio installation, sales and manager |
03-16-2012, 10:16 AM | #14 |
Booooosted.
|
I'm not really sure how much material.
Ported throttle body is an ok mod I guess. Not worth it to me though. Of course, I say that having nothing to compare. Ported heads, however, WAY not worth the money unless the heads are already off for some reason. |
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Ported throttle body and CAI still show good gains? | mypuppysirius | Camaro V6 LLT Engine, Exhaust, and Bolt-Ons | 21 | 05-07-2013 03:15 PM |
Vmax Ported Throttle Body installed | nyrfan | Camaro V6 LLT Engine, Exhaust, and Bolt-Ons | 6 | 11-22-2011 10:35 AM |
Ported Throttle Body - in stock! NorCal | Extreme454 | USA - California | 6 | 07-03-2011 09:24 PM |
Ported throttle body.. | Pollock | Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons | 3 | 05-17-2011 07:00 PM |