What Did You Do To Your Camaro Today? [v2 thread] - Page 51 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Infidel67 · 11-24-2023, 04:37 PM

Changed out my Taillights LED's to these CANbus Big Boys

They're red and real bright, no hyperflash and a year warranty on it.

chevy pilot · 11-24-2023, 11:36 PM

11/SS/RS · 11-25-2023, 06:03 AM

Did the rear differential lube change with RP. No additive... nice and smooth, no chattering! Next up, Transmission filter and fluid change.

1JEWLDSSRS · 11-25-2023, 11:10 AM

Put her new battery on the charger to top it off. Then install it.

FasNuf · 11-25-2023, 04:11 PM

Installing Hotchkis front and rear sway bars. Not gonna lie, it's a real bitch on the ZL1. Finally got the front finished, and getting ready to do the rear. Had to slide the intercooler pump out of the way, drop the RH toe rod off the knuckle and remove the stock bushings and brackets to get it out while jacking the knuckles up or down for clearance. The electric motor for the steering rack was constantly in the way too. I did not have to jack up the engine. The factory service manual was little help except for torque specs.
I'm sure the rear will be easier.

Infidel67 · 11-25-2023, 04:20 PM

Quote:

Originally Posted by FasNuf

Installing Hotchkis front and rear sway bars. Not gonna lie, it's a real bitch on the ZL1. Finally got the front finished, and getting ready to do the rear. Had to slide the intercooler pump out of the way, drop the RH toe rod off the knuckle and remove the stock bushings and brackets to get it out while jacking the knuckles up or down for clearance. The electric motor for the steering rack was constantly in the way too. I did not have to jack up the engine. The factory service manual was little help except for torque specs.
I'm sure the rear will be easier.

Yeah I got tired of the front one, the bushings were like welded on the bar, so I took out the 4 1/2" grinder and cut off one end lol.
Rear was easy peasy but after I got it almost on I noticed the bushings where swapped so I had to take it back off, and it was a B*tch since I done it with a Car Jack on dirt, it was a fun day.

FasNuf · 11-25-2023, 08:47 PM

Installed the rear Hotchkis and it was much easier. Took the car for a quick test to make sure there wasn't anything strange and WOW! This thing is on rails and I'm impressed. I did have to drop the rear NPP exhaust down enough to clear the bar and for wrenching, but it wasn't bad at all.

SlowLS1 · 11-26-2023, 06:47 AM

Installed a new rear main seal and got the McLeod RXT mounted.

Indian_Mack · 11-26-2023, 07:45 AM

New wheels, tires and caliper covers

Side decals coming Monday....

Sent from my SM-S906U using Tapatalk

11/SS/RS · 11-26-2023, 03:40 PM

Changed my cabin filter today...I believe this is the original from the factory. 54k miles. Check yours if you havent, hopefully youre not as surpeised as I was...

Infidel67 · 11-26-2023, 03:51 PM

Quote:

Originally Posted by 11/SS/RS

Changed my cabin filter today...I believe this is the original from the factory. 54k miles. Check yours if you havent, hopefully youre not as surpeised as I was...

Changing the cabin filters once a year

Eddymel1998 · 11-27-2023, 11:41 AM

Quote:

Originally Posted by 11/SS/RS

Changed my cabin filter today...I believe this is the original from the factory. 54k miles. Check yours if you havent, hopefully youre not as surpeised as I was...

When I bought my car it had tons of mold on the inside, so after cleanup the filter was first thing I replaced, since then got a reusable sick dope K&N cabin filter, mostly so I can say car has a "k&n air filter" in it

Infidel67 · 11-29-2023, 11:04 AM

Added my quick connect for the NOCO jump pack and Trickle Charger.

SlowLS1 · 11-29-2023, 12:20 PM

Quote:

Originally Posted by Infidel67

Added my quick connect for the NOCO jump pack and Trickle Charger.

Which NOCO did you buy, I've thought about grabbing one just to have around if needed. DO you like it?

11-24-2023, 04:37 PM	#701
Infidel67 Life's just a Ride Drives: 2011 Synergy Camaro 2SS/RS LS3 Join Date: Oct 2013 Location: Columbia SC Posts: 854 View My Garage	Changed out my Taillights LED's to these CANbus Big Boys They're red and real bright, no hyperflash and a year warranty on it. Attached Images __________________ 2011 Synergy Camaro 2SS/RS Ls3, LTH, CAI Custom Intake, TSP stage-3 111-LSA Cam, RWHP 503/508

11-25-2023, 11:10 AM	#704
1JEWLDSSRS Drives: 2011 SS-RS Join Date: May 2011 Location: FLORIDA Posts: 11,485	Put her new battery on the charger to top it off. Then install it. __________________ TSP STAGE 3 CAM,231/246 @112 LSA 614/641 LIFT, CIRCLE D 5C-4200-4500 CONVERTER,LOD INTAKE.CORSA EXHAUST. DSS 1 PC DS. PEGASUS SOLID CRADLE MOUNTS. 486RWHP/475RWTQ.LOTS MORE.

11-25-2023, 04:11 PM	#705
FasNuf Drives: 2014 Camaro ZL1 Join Date: Jul 2019 Location: Oregon Posts: 1,629 View My Garage	Installing Hotchkis front and rear sway bars. Not gonna lie, it's a real bitch on the ZL1. Finally got the front finished, and getting ready to do the rear. Had to slide the intercooler pump out of the way, drop the RH toe rod off the knuckle and remove the stock bushings and brackets to get it out while jacking the knuckles up or down for clearance. The electric motor for the steering rack was constantly in the way too. I did not have to jack up the engine. The factory service manual was little help except for torque specs. I'm sure the rear will be easier. __________________ . . . . https://www.youtube.com/channel/UCgN...etl17hA/videos

11-25-2023, 08:47 PM	#707
FasNuf Drives: 2014 Camaro ZL1 Join Date: Jul 2019 Location: Oregon Posts: 1,629 View My Garage	Installed the rear Hotchkis and it was much easier. Took the car for a quick test to make sure there wasn't anything strange and WOW! This thing is on rails and I'm impressed. I did have to drop the rear NPP exhaust down enough to clear the bar and for wrenching, but it wasn't bad at all. __________________ . . . . https://www.youtube.com/channel/UCgN...etl17hA/videos

11-26-2023, 06:47 AM	#708
SlowLS1 Drives: 2010 Camaro SS , 2011 Colorado LS1 Join Date: Jan 2022 Location: Greenville, SC Posts: 857	Installed a new rear main seal and got the McLeod RXT mounted. __________________

11-24-2023, 11:36 PM	#702
chevy pilot Drives: 2010 2SS/RS A6 Join Date: May 2019 Location: Hki.Finland Posts: 983

11-25-2023, 06:03 AM	#703
11/SS/RS Drives: 2011 Camaro 2SS/RS Join Date: Nov 2023 Location: Southern Colorado Posts: 54	Did the rear differential lube change with RP. No additive... nice and smooth, no chattering! Next up, Transmission filter and fluid change.

11-26-2023, 07:45 AM	#709
Indian_Mack Drives: 2013 Chevy Camaro 1LT Join Date: May 2022 Location: Lacey, Wa Posts: 67	New wheels, tires and caliper covers Side decals coming Monday.... Sent from my SM-S906U using Tapatalk

11-26-2023, 03:40 PM	#710
11/SS/RS Drives: 2011 Camaro 2SS/RS Join Date: Nov 2023 Location: Southern Colorado Posts: 54	Changed my cabin filter today...I believe this is the original from the factory. 54k miles. Check yours if you havent, hopefully youre not as surpeised as I was... Attached Images

11-29-2023, 11:04 AM	#713
Infidel67 Life's just a Ride Drives: 2011 Synergy Camaro 2SS/RS LS3 Join Date: Oct 2013 Location: Columbia SC Posts: 854 View My Garage	Added my quick connect for the NOCO jump pack and Trickle Charger. Attached Images __________________ 2011 Synergy Camaro 2SS/RS Ls3, LTH, CAI Custom Intake, TSP stage-3 111-LSA Cam, RWHP 503/508