03-21-2017, 12:03 PM | #57 |
Drives: 2011 Synergy Green Camaro SS Join Date: Jun 2011
Location: Raleigh
Posts: 55
|
Hmm...well when my rear backup camera comes in, I'll have to take it out again and see if I can find a way to fix it. Maybe i have some bare wire touching metal somewhere
|
03-21-2017, 01:32 PM | #58 |
Drives: 2012 Camaro SS Convert Join Date: Feb 2017
Location: Phoenix Arizona
Posts: 198
|
Installed PAC kit and Ken wood unit...
Yeah the turn signal chime is much lower. But all honesty I don't mind. I kind of wonder if maybe I should have set the chime to low before I removed the stock hu. Maybe that's why it's so loud.
What I did was put a piece of electric tape over it and hid it under the hu in the dash. Can still hear it. But the neighbors can no longer hear it lol I still wish we had a better explanation of why this worked in one port and not the other. The difference is insane !! |
03-21-2017, 01:44 PM | #59 |
Drives: 2012 Camaro SS Convert Join Date: Feb 2017
Location: Phoenix Arizona
Posts: 198
|
Also does anyone know what kind of watts this stock amp is pushing?
Would be nice to know if we can just swap out the crappy stock speakers for something better and still push em. Would save money and time. Sent from my iPhone using Tapatalk |
03-21-2017, 05:31 PM | #60 |
Drives: 2011 2SS/RS Join Date: Feb 2016
Location: Jacksonville FL
Posts: 1,191
|
245w PEAK meaning roughly 122wRms. Divide that by 9 speakers you get 13.7wRms to each speaker 28w peak each.
|
03-21-2017, 05:48 PM | #61 |
Drives: 2012 Camaro SS Convert Join Date: Feb 2017
Location: Phoenix Arizona
Posts: 198
|
Hmmmm what if you only used it to power up 4 speakers ? Or maybe it doesn't work like that huh lol
Just shocked how much better the stock speakers sound after all this Sent from my iPhone using Tapatalk |
03-21-2017, 09:39 PM | #62 | |
Drives: 2011 2SS/RS Join Date: Feb 2016
Location: Jacksonville FL
Posts: 1,191
|
Quote:
i just listed Type R components for sale. would be great on the aftermarket setups |
|
03-21-2017, 09:43 PM | #63 |
Drives: 2012 Camaro SS Convert Join Date: Feb 2017
Location: Phoenix Arizona
Posts: 198
|
I ordered the fark kit and it's on its way. But that was before I swapped the connections and it sounded good like how.. debating if I should maybe try to send it back or keep it
Sent from my iPhone using Tapatalk |
03-22-2017, 12:47 PM | #64 |
THERAPY
|
Here's mine
|
03-23-2017, 03:08 PM | #65 |
Drives: 2011 Synergy Green Camaro SS Join Date: Jun 2011
Location: Raleigh
Posts: 55
|
This might be a dumb question, but i'll ask it anyways.
I was going to get the FARK kit when I install my 4 channel amp. I'm just going to use it to power my aftermarket speakers and I have no plans of getting subs. Since I'm not getting subs, would I be able to make the amp work with my speakers with only the X2 harness? Or would I need to get both the X2 and X3 RCA harness? I guess what I'm really asking is, what is the purpose of the RCA cables and do I need them if i'm just wiring my speakers using the FARK X2 harness? |
03-23-2017, 03:10 PM | #66 |
Drives: 2012 Camaro SS Convert Join Date: Feb 2017
Location: Phoenix Arizona
Posts: 198
|
I could be wrong...but if your amp supports high level inputs then you won't be needing the rca at all.
The rca is fixed level outputs... though not super sure on the harness Sent from my iPhone using Tapatalk |
03-25-2017, 07:07 PM | #67 |
Drives: 2010 Camaro 2LT/RS Join Date: Nov 2016
Location: New Jersey
Posts: 35
|
Thanks for this thread, guys. I brought my car in for them to fix a setting and they plugged it in wrong when they put it back together. I've been annoyed for weeks driving around with the volume that way. lol. Easy fix!
|
03-25-2017, 08:41 PM | #68 |
Evil Genius of Chevrolet
Drives: 2017 Z06, 2019 XTS, 2013 SS Join Date: Feb 2017
Location: New York
Posts: 3,260
|
9 speakers on the factory BA system? That's odd I count maybe 7. Anyone have all locations and sizes?
__________________
GPI SS2 VVT cam, ECS Novi 1500 supercharger, Corsa Extreme, Detroit Speed and BMR suspension, Circle D triple disc, Melling oil pump, LS2 chain tensioner, ATI 10% UD, DSX E85 kit, High Energy coils, BTR springs, LS2 Lifter trays, Titanium retainers, hardened push rods, FIC 1000 injectors, ZL1 pump, Mighty Mouse catch can, AEM gauges, Tial BOV, Richmond 3.91 gears, Custom gauge bezels, Speed Engineering headers, Stainless Works HF cats, DSX Aux pump, 710rwhp on E85.
|
03-25-2017, 08:56 PM | #69 |
Drives: 2011 2SS/RS Join Date: Feb 2016
Location: Jacksonville FL
Posts: 1,191
|
|
03-25-2017, 09:04 PM | #70 |
Drives: 2012 Camaro SS Convert Join Date: Feb 2017
Location: Phoenix Arizona
Posts: 198
|
Even on a vert?
Sent from my iPhone using Tapatalk |
|
|
|
|