Eagle Eye Headlights with HIDs - Page 11 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

starman · 02-07-2011, 05:25 PM

So I'm going to be pulling the trigger on these soon. If they're wired to the parking lights, do the halos stay on while driving?

cntryman77 · 02-07-2011, 06:57 PM

ok, here is the DIY for the adding the HID kit to these
http://www.camaro5.com/forums/showth...=1#post2813923

erk5000 · 02-07-2011, 08:54 PM

Quote:

Originally Posted by yellowlightning2009

I got a qeustion I just got my eagle eys not installed yet but on the back of them is shows h9/h13 whats that mean its uses both or any ideas thanks

Quote:

Originally Posted by starman

So I'm going to be pulling the trigger on these soon. If they're wired to the parking lights, do the halos stay on while driving?

If you wire the halo's to the parking lights, they will come on when you turn your light switch to the right once, turn it twice, push the fog light button and they will turn on automatically at night time. Your halo's will always be on with your parking lights.

Quote:

Originally Posted by cntryman77

ok, here is the DIY for the adding the HID kit to these
http://www.camaro5.com/forums/showth...=1#post2813923

Looks good!

starman · 02-08-2011, 05:57 PM

Quote:

Originally Posted by erk5000

If you wire the halo's to the parking lights, they will come on when you turn your light switch to the right once, turn it twice, push the fog light button and they will turn on automatically at night time. Your halo's will always be on with your parking lights.

Sounds perfect, thanks for the response man!

xpanda305x · 02-08-2011, 09:06 PM

Well!!!! HIDS are installed i went 8K...

at first i got worried because i thought high beams wasnt working..all i heard was clunk sound...i was like...mm maybe something is blocking it...comes to be...its like that!!! easy to install hids! i didnt know you didnt have to unscrew the back plate...so i stripped one screw..owells

xpanda305x · 02-08-2011, 09:27 PM

how do ya like so far?

xpanda305x · 02-09-2011, 09:15 PM

question do we need to run a relay system or not? i have one but from my old setup..h13 bixenon. would it work. i have all the plugs pluged in just need the factory harness and they work

hi n lows

but is a relay needed?

xpanda305x · 02-09-2011, 09:31 PM

look

Red Squares are to the ballast
Greenish Square is to the power
Orange square is to the Grounder

but the Red Circle is to??? its a 2 prong typish connector?

the cable just sitting in the middle was used in the H13 Bi xenon kit and im guessing not to be used in this install?

help please?

xpanda305x · 02-09-2011, 09:33 PM

and this is how i have it setup in the garage right now..

all that it is missing is the factory connector which is in the car! lmaoo.

would it be good to run it like that ? i mean...it will not have a relay but would it be bad? also would my relay work as posted earlier ?

and if i do go relay. where would the wires that are connected from the hids in the headlight that go to the ballast go?

H3LL1ON · 02-10-2011, 12:45 AM

Does the wiring diagram showing the optional relay setup that I posted above not help?

xpanda305x · 02-10-2011, 11:32 PM

alrighty! got them installed and running...all i have to say is...OMG these lights are SEXS! they are amazing i <3 soo much

i went different since everyone has white or some color hids.. i went blue

looks nice. pics coming up soon

( hardest part....getting that bolt all the way on the top out!!! )( HOLY GOD A MISSION )

erk5000 · 02-11-2011, 02:09 AM

That's good. Post some pics up and I know about that top bolt! PIA! haha but it's easy nonetheless.

cntryman77 · 02-11-2011, 05:07 AM

I peronsally like the relay better becuase of ther drls...it's not really a clean power for the ballasts

xpanda305x · 02-11-2011, 07:16 AM

okay problem encounter....yesterday everything worked fine. this morning i go and hit unlock.....nothing. so i jumped in the car and started her up. with the light switch all the way to the left. only the projectors come on....sidemarkers dont turn on...move it to the right to the middle position and halos and sidemarker turn on perfectly!!! and all to the right everything works!! idunno what happen...

Sent from my T-Mobile myTouch 3G Slide using Tapatalk

02-07-2011, 05:25 PM	#141
starman Drives: 2010 SS - LS3 - CGM Join Date: Oct 2010 Location: CA Posts: 175	So I'm going to be pulling the trigger on these soon. If they're wired to the parking lights, do the halos stay on while driving? __________________ Injen Long-tube CAI, Flowmaster American Thunder Catback, Eagle Eye Headlights w/HIDs, Sparks SS emblems, Unrestricted Motorsports Gen1 Spoiler, Vossen CV3 Wheels, Nitto Invos (275/40-20)x4

02-07-2011, 06:57 PM	#142
cntryman77 Drives: 2010 Camaro LS Join Date: Mar 2010 Location: Newton Falls, OH Posts: 1,092	ok, here is the DIY for the adding the HID kit to these http://www.camaro5.com/forums/showth...=1#post2813923 __________________ My build thread: http://www.camaro5.com/forums/showthread.php?t=126631

02-08-2011, 09:27 PM	#146
xpanda305x Banned Drives: Dark Knight Join Date: Nov 2009 Location: Gunshine State Posts: 3,150 View My Garage	how do ya like so far? Last edited by xpanda305x; 02-08-2011 at 09:46 PM.

02-10-2011, 12:45 AM	#150
H3LL1ON H3LL1ON Drives: 2010 1LT Camaro Synergy Green Join Date: Jul 2010 Location: Ontario Posts: 222	Does the wiring diagram showing the optional relay setup that I posted above not help? __________________ It's Green, really Green! C5

02-11-2011, 05:07 AM	#153
cntryman77 Drives: 2010 Camaro LS Join Date: Mar 2010 Location: Newton Falls, OH Posts: 1,092	I peronsally like the relay better becuase of ther drls...it's not really a clean power for the ballasts __________________ My build thread: http://www.camaro5.com/forums/showthread.php?t=126631

02-08-2011, 09:06 PM	#145
xpanda305x Banned Drives: Dark Knight Join Date: Nov 2009 Location: Gunshine State Posts: 3,150 View My Garage	Well!!!! HIDS are installed i went 8K... at first i got worried because i thought high beams wasnt working..all i heard was clunk sound...i was like...mm maybe something is blocking it...comes to be...its like that!!! easy to install hids! i didnt know you didnt have to unscrew the back plate...so i stripped one screw..owells

02-09-2011, 09:15 PM	#147
xpanda305x Banned Drives: Dark Knight Join Date: Nov 2009 Location: Gunshine State Posts: 3,150 View My Garage	question do we need to run a relay system or not? i have one but from my old setup..h13 bixenon. would it work. i have all the plugs pluged in just need the factory harness and they work hi n lows but is a relay needed?

02-09-2011, 09:31 PM	#148
xpanda305x Banned Drives: Dark Knight Join Date: Nov 2009 Location: Gunshine State Posts: 3,150 View My Garage	look Red Squares are to the ballast Greenish Square is to the power Orange square is to the Grounder but the Red Circle is to??? its a 2 prong typish connector? the cable just sitting in the middle was used in the H13 Bi xenon kit and im guessing not to be used in this install? help please?

02-09-2011, 09:33 PM	#149
xpanda305x Banned Drives: Dark Knight Join Date: Nov 2009 Location: Gunshine State Posts: 3,150 View My Garage	and this is how i have it setup in the garage right now.. all that it is missing is the factory connector which is in the car! lmaoo. would it be good to run it like that ? i mean...it will not have a relay but would it be bad? also would my relay work as posted earlier ? and if i do go relay. where would the wires that are connected from the hids in the headlight that go to the ballast go?

02-10-2011, 11:32 PM	#151
xpanda305x Banned Drives: Dark Knight Join Date: Nov 2009 Location: Gunshine State Posts: 3,150 View My Garage	alrighty! got them installed and running...all i have to say is...OMG these lights are SEXS! they are amazing i <3 soo much i went different since everyone has white or some color hids.. i went blue looks nice. pics coming up soon ( hardest part....getting that bolt all the way on the top out!!! )( HOLY GOD A MISSION )

02-11-2011, 02:09 AM	#152
erk5000 Drives: 2010 Camaro 2SS L99 SIM Join Date: Feb 2010 Location: Oceanside, CA Posts: 1,036	That's good. Post some pics up and I know about that top bolt! PIA! haha but it's easy nonetheless.

02-11-2011, 07:16 AM	#154
xpanda305x Banned Drives: Dark Knight Join Date: Nov 2009 Location: Gunshine State Posts: 3,150 View My Garage	okay problem encounter....yesterday everything worked fine. this morning i go and hit unlock.....nothing. so i jumped in the car and started her up. with the light switch all the way to the left. only the projectors come on....sidemarkers dont turn on...move it to the right to the middle position and halos and sidemarker turn on perfectly!!! and all to the right everything works!! idunno what happen... Sent from my T-Mobile myTouch 3G Slide using Tapatalk

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
new eagle eye halo headlights	tallmantony	Cosmetics and Lighting Modification Discussions	51	01-29-2012 09:11 PM
OEM Non-RS Headlights with AAC Halo's & HID's	erk5000	Exterior Parts & Accessories	11	08-06-2010 05:42 AM
Did anyone change non-rs headlights to OEM RS HIDs (bi-xenon)	verboten	Cosmetics and Lighting Modification Discussions	8	06-14-2010 12:43 PM
I can see!	The_Blur	Off-topic Discussions	31	07-01-2009 02:19 AM
"Regular" headlights (not HIDs)	2KZ28_For_Now	Camaro Photos \| Spyshots \| Video \| Media Gallery	66	11-14-2008 07:07 AM