Project Black Widow - The Build - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

1 BADD 1LE · 11-25-2013, 02:54 PM

"Phase 1 Build" (In Progress)

2014 6.2L 376c.i. LS3 Camaro 2SS/1LE - Whipple 2.9L Supercharger with 3.5" Pulley Kit and Intercooler @ 15psi boost, LS3 Cylinder Head Upgrade (Manley & Comp parts), Lethal Racing Nightfury Camshaft, Kooks 1 7/8'' Long Tube Headers, Catalytic Converters Deleted, NPP Race Exhaust Deleted - No mufflers, K&N 63 Series FIPK Cold Air Intake, ZL1 Fuel Pump with Kenne Bell Boost-A-Pump, 63lb/hr Fuel Injectors, Holley Valve Covers, Lethal Racing Dyno Tuned, Mickey Thompson ET Street 305/35R20 Drag Radials

*Shooting for 800hp+ at the Crank/700hp+ at the wheels - we'll see this week on the dyno - stay tuned!!!

"Phase 2 Build" (Coming Next Year)

LSX 396c.i. fully forged motor - Lunati forged Crankshaft, Callies 6.125" H-Beam Connecting Rods w/ ARP 2000 7/16" bolts, Wiseco custom 4.135" forged Pistons, NPR stainless chrome Rings 1.2 1.2 3mm, Clevite MS 2199 H-Main Bearings, Clevite CB 663 H-Rod Bearings, Dura Bond Camshaft Bearings and ARP main studs, 80lb/hr Fuel Injectors, Kenne Bell 3.6L Supercharger w/upgraded Intercooler @ 25psi boost.

13lstuner · 11-25-2013, 03:32 PM

this looks like "one bad 1LE"!
Haha are what I did there?
But in all seriousness this is one hell of a car I'm subscribed to see how it comes along!

SSTG · 11-25-2013, 03:36 PM

Love that Whipple.
Nice car, looks like mine.

SlyJester7 · 11-25-2013, 06:42 PM

WOW Thats awesome. I will have to stay tuned and see the progress

SGDM · 11-25-2013, 07:18 PM

Amazing car...subscribed.

1 BADD 1LE · 12-03-2013, 08:24 AM

Well, we are almost complete with the first phase of my build...Whipple sent the wrong size pulley (4") and I had a pinhole leak in my Methanol tank, so we are waiting on the 3.5" Supercharger Pulley and a new Meth tank, and some engine dress up parts...she pulled great numbers as you'll see below for 93 octane pump gas...I must say, she is a BEAST!!! The only way I can hammer down the car on the street without burning the tires off is to mildly run her up to about 3,000RPM's in 3rd Gear (65mph) and stomp her...she still spins slightly but pulls extremely hard all the way to 7,000RPM's, quickly shift to 4th gear and run her up to 7,000RPM's, then shift to 5th gear and let off - at that point I'm at 140mph and still pulling hard!!! we're gonna install the 3.5" Supercharger Pulley and Methanol Injection System this week and re-dyno her - hoping for 950hp (820rwhp)!!! And that Night Fury Cam is an absolute classical symphony to my ears!!!

My OEM hood would not close due to the heat extractor sitting on top of the Whipple Supercharger, so 2014 SS owners be prepared to either get a 2010-2013 hood or buy an aftermarket like I did (MPD1 Z-Force Ram Air hood)...I have a 2010 hood on my car presently until my new hood arrives...big thanks to the team at Lethal Racing, they are the best!

1 BADD 1LE · 12-10-2013, 12:47 PM

Here's a link to my exhaust video - http://www.youtube.com/watch?feature...&v=fOydT6odZpg

1 BADD 1LE · 12-10-2013, 01:14 PM

Here's a pic of the custom emblems and embroidered Leather Seat Head Rest I'm having made!

aquablueL99 · 12-10-2013, 02:27 PM

Badd,

What a build of a beautiful car...love the red decals on the ground effects....some real nice personal touches....OH BTW.....yeah it sounds outragous!!

Nicely done on a beauty...

Kurt ABL99...:chevy;

Behic2320 · 12-10-2013, 03:33 PM

well yea....that didnt take long haha

one hell of a build man cant wait to see how she progresses

MaxxMuscle · 12-10-2013, 04:50 PM

Bad azz car bro.

wessolbuf1 · 12-11-2013, 06:43 PM

Nice Bulid

What if any mods did you do to the driveline?

11-25-2013, 02:54 PM	#1
1 BADD 1LE Black Widow Drives: 2014 Camaro 427SS Join Date: Nov 2013 Location: Lafayette, LA Posts: 178	Project Black Widow - The Build "Phase 1 Build" (In Progress) 2014 6.2L 376c.i. LS3 Camaro 2SS/1LE - Whipple 2.9L Supercharger with 3.5" Pulley Kit and Intercooler @ 15psi boost, LS3 Cylinder Head Upgrade (Manley & Comp parts), Lethal Racing Nightfury Camshaft, Kooks 1 7/8'' Long Tube Headers, Catalytic Converters Deleted, NPP Race Exhaust Deleted - No mufflers, K&N 63 Series FIPK Cold Air Intake, ZL1 Fuel Pump with Kenne Bell Boost-A-Pump, 63lb/hr Fuel Injectors, Holley Valve Covers, Lethal Racing Dyno Tuned, Mickey Thompson ET Street 305/35R20 Drag Radials *Shooting for 800hp+ at the Crank/700hp+ at the wheels - we'll see this week on the dyno - stay tuned!!! "Phase 2 Build" (Coming Next Year) LSX 396c.i. fully forged motor - Lunati forged Crankshaft, Callies 6.125" H-Beam Connecting Rods w/ ARP 2000 7/16" bolts, Wiseco custom 4.135" forged Pistons, NPR stainless chrome Rings 1.2 1.2 3mm, Clevite MS 2199 H-Main Bearings, Clevite CB 663 H-Rod Bearings, Dura Bond Camshaft Bearings and ARP main studs, 80lb/hr Fuel Injectors, Kenne Bell 3.6L Supercharger w/upgraded Intercooler @ 25psi boost. Attached Images

11-25-2013, 03:32 PM	#2
13lstuner Drives: 2013 2LS BLK Join Date: Oct 2013 Location: North Alabama Posts: 1,444	this looks like "one bad 1LE"! Haha are what I did there? But in all seriousness this is one hell of a car I'm subscribed to see how it comes along! __________________

11-25-2013, 06:42 PM	#4
SlyJester7 SoCal HT5 COTW 8/26/13 Drives: 2013 SS/RS LS3 Join Date: Nov 2009 Location: So Cal Posts: 1,054 View My Garage	WOW Thats awesome. I will have to stay tuned and see the progress __________________

11-25-2013, 07:18 PM	#5
SGDM Drives: 2016 2SS Join Date: Nov 2011 Location: North Texas Posts: 1,422	Amazing car...subscribed. __________________ Who Dares...Wins

12-03-2013, 08:24 AM	#6
1 BADD 1LE Black Widow Drives: 2014 Camaro 427SS Join Date: Nov 2013 Location: Lafayette, LA Posts: 178	822hp (715rwhp) on 93 octane pump gas Well, we are almost complete with the first phase of my build...Whipple sent the wrong size pulley (4") and I had a pinhole leak in my Methanol tank, so we are waiting on the 3.5" Supercharger Pulley and a new Meth tank, and some engine dress up parts...she pulled great numbers as you'll see below for 93 octane pump gas...I must say, she is a BEAST!!! The only way I can hammer down the car on the street without burning the tires off is to mildly run her up to about 3,000RPM's in 3rd Gear (65mph) and stomp her...she still spins slightly but pulls extremely hard all the way to 7,000RPM's, quickly shift to 4th gear and run her up to 7,000RPM's, then shift to 5th gear and let off - at that point I'm at 140mph and still pulling hard!!! we're gonna install the 3.5" Supercharger Pulley and Methanol Injection System this week and re-dyno her - hoping for 950hp (820rwhp)!!! And that Night Fury Cam is an absolute classical symphony to my ears!!! My OEM hood would not close due to the heat extractor sitting on top of the Whipple Supercharger, so 2014 SS owners be prepared to either get a 2010-2013 hood or buy an aftermarket like I did (MPD1 Z-Force Ram Air hood)...I have a 2010 hood on my car presently until my new hood arrives...big thanks to the team at Lethal Racing, they are the best! Attached Images

11-25-2013, 03:36 PM	#3
SSTG Drives: 2014 Z51 Corvette Join Date: Apr 2011 Location: Ofallon, Mo. Posts: 5,822	Love that Whipple. Nice car, looks like mine.

12-10-2013, 12:47 PM	#7
1 BADD 1LE Black Widow Drives: 2014 Camaro 427SS Join Date: Nov 2013 Location: Lafayette, LA Posts: 178	Here's a link to my exhaust video - http://www.youtube.com/watch?feature...&v=fOydT6odZpg

12-10-2013, 01:14 PM	#8
1 BADD 1LE Black Widow Drives: 2014 Camaro 427SS Join Date: Nov 2013 Location: Lafayette, LA Posts: 178	New Emblems and Leather Seat Head Rest design Here's a pic of the custom emblems and embroidered Leather Seat Head Rest I'm having made! Attached Images

12-10-2013, 02:27 PM	#9
aquablueL99 Jackson's COTW Drives: 1968 Camaro & 2010 Camaro 2SS Join Date: Jul 2009 Location: Chalmers, Indiana Posts: 1,740 View My Garage	Badd, *What a build of a beautiful car...love the red decals on the ground effects....some real nice personal touches....OH BTW.....yeah it sounds outragous!! Nicely done on a beauty...* Kurt ABL99...:chevy; __________________ Tru Blu Beauty http://www.camaro5.com/forums/showthread.php?t=183914

12-10-2013, 03:33 PM	#10
Behic2320 SoCal HT5 COTW 4/21/13 Drives: 2011 SS/RS Blown & Cammed LS3 Join Date: Sep 2011 Location: Sandy Eggo Posts: 3,047	well yea....that didnt take long haha one hell of a build man cant wait to see how she progresses __________________

12-10-2013, 04:50 PM	#11
MaxxMuscle Blanchard Performance Drives: 2014 Black ZL1 Join Date: Jun 2013 Location: Louisiana Posts: 171	Bad azz car bro.

12-11-2013, 06:43 PM	#12
wessolbuf1 Drives: 2014 Camaro 1LE Summit White Join Date: Oct 2013 Location: port saint lucie, fl Posts: 176	Nice Bulid What if any mods did you do to the driveline? __________________ 2014 Camaro 1LE Summit White Ordered 10-1-13 TPW- 10-28-13 Delivered 11-12-13