03-05-2021, 09:24 PM | #1 |
|
JPSS Sway Bars (27mm Solid Front & 32mm Solid Rear)
Hey everyone,
I'm selling my JPSS sway bars. The front is a solid 27mm bar and the rear is a solid 32mm bar. They will come with the bushings, but no end links. The bars were a bit too stiff on the street with my specific coilovers, but would be great for Camaros with OEM suspension, or springs. I don't have pictures at the moment, but I'll add some to the thread tomorrow. Looking at $500 OBO. I just wanted to get this out there to spark some interest. I'd rather sell it to a fellow Camaro5 member directly than having to go through eBay. Feel free to DM if interested.
__________________
Last edited by StlRomAniaN; 03-18-2021 at 09:50 PM. |
03-05-2021, 09:44 PM | #2 |
Banned
Drives: 2015 Camaro Join Date: Aug 2018
Location: My Garage
Posts: 1,125
|
Those will sell fast. Goodluck!
|
03-06-2021, 12:03 PM | #3 |
Drives: 2010 CGM 2SS/RS LS3 Swapped A6 Join Date: Sep 2016
Location: Spring Hill, FL
Posts: 4,584
|
If you don't mind me asking, what was the main issue? Were they causing the car to bounce?
I am asking because I already have coilovers and will be getting sway bars in the near future. My coilovers made a huge difference in the feel of the car, but I still want to get rid of the little bit of body roll I have left.
__________________
2010 CGM Camaro 2SS LS3 Swapped A6 - GPI LS3 SS1 .647/.638, (224/237, 112 +4, 7º overlap) on CamMotion 8620 core, BTR Platinum .660" Dual Spring kit w/titanium retainers, CHE bronze trunnion upgrade, stock heads milled @ .015, Melling HV 10296 oil pump, TSP 1-7/8" long tube headers (W/Catless Off-road Pipes), Corsa Xtreme 3" Catback, GPI Ported/Rod Mod Intake, Stage 2 Ported Throttle Body, Vararam OTR CAI, Mike Norris Gen 2 catch can + GM 1LE clean side separator, 160º thermostat - Megan Racing adjustable coilovers (lowered 1.75"), MRR M017 10/11" wheels-Tuned by Ryan @ GPI
|
03-06-2021, 02:36 PM | #4 | |
Banned
Drives: 2015 Camaro Join Date: Aug 2018
Location: My Garage
Posts: 1,125
|
Quote:
|
|
03-06-2021, 10:46 PM | #5 | |
|
Quote:
The car was just a little too stiff for the street for my liking. The Pedders Xa coilovers have stiff springs and I added a lot of preload to them due to my aggressive drop. That with the sway bars caused one of rear tires to ever so slightly lift off the ground in small, right corners (have a lot of them near me). The bars would be great with less stiff springs/less preload. Super flat through corners and held well through the long sweepers. Sent from my iPhone using Tapatalk
__________________
|
|
03-06-2021, 10:47 PM | #6 | |
|
JPSS Sway Bars (27mm Solid Front & 32mm Solid Rear)
Quote:
True. The only thing I’ll add to that is that you’ll feel more “bounce” due to feeling the road more since you essentially tie both wheels on each axle to each other. Sent from my iPhone using Tapatalk
__________________
|
|
03-07-2021, 02:18 AM | #7 |
Drives: 2010 2SS/RS Join Date: Dec 2009
Location: Clarksville Tennesse.
Posts: 6,069
|
I have the JPSS 32mm rear sway bar and a OEM 1LE bar in the front with 1LE shocks and struts with 1” BMR springs and yes the car is stiff it’s what I wanted to road course the car. The car doesn’t bounce or feel unstable. This is a smoking deal for bot match sway barns!!
__________________
Orange Krush II
1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components. |
03-07-2021, 06:58 PM | #8 |
Drives: 2022 1SS 1LE A10 BCD WCT+PDR Join Date: Mar 2008
Location: Johnstown, PA
Posts: 3,241
|
Bouncing is going to be a result of wrong dampening for the wheel rate which is a combo of the springs, anti roll bar, bushings and tire choice. Also if the bushings were not timed that can cause bouncing.
__________________
2022 1SS 1LE A10 BCD WCT+PDR2014 1SS 1LE NPP RECARO SIM-SOLD1995 Z28 M6 GSC PGM-SOLD1975 NOVA COUPE 300HP 350 TH350 FLASH RED-SOLD
|
03-08-2021, 10:58 PM | #9 | |
|
Quote:
Yup! Still no interest at the moment! Sent from my iPhone using Tapatalk
__________________
|
|
03-18-2021, 09:50 PM | #10 |
|
Pictures to be uploaded tomorrow, 3/19. Sorry for the delay. I've been preoccupied. :P
__________________
|
03-21-2021, 11:47 AM | #11 |
|
Sent from my iPhone using Tapatalk
__________________
|
03-21-2021, 11:48 AM | #12 |
|
Sent from my iPhone using Tapatalk
__________________
|
03-21-2021, 11:49 AM | #13 |
|
I could have cleaned them a bit for the pictures to make them look good, but these are “take-off dirty”.
Sent from my iPhone using Tapatalk
__________________
|
03-23-2021, 10:00 PM | #14 |
|
$500 shipped OBO.
Sent from my iPhone using Tapatalk
__________________
|
|
|
|
|