12-09-2013, 09:06 PM | #379 |
Drives: 01SS Join Date: Nov 2011
Location: Michigan
Posts: 258
|
Good call. Those LMs suuuuuuuck.....
__________________
'01SS - RHS 460....fed by 8 little throttle bodies
Kinsler / Fikse / RHS / Mast / MWC / Kooks |
12-09-2013, 11:17 PM | #380 |
|
Yea I was happy with it one stock manifolds and cats, but with the headers it was to much and didnt sounded amazing. This setup should be perfect. May throw a cutout in it later on tho.
__________________
2002 Camaro SS- BTR Stage 3, 799 Heads, Bolt on's Tuned by John at Broadview Automotive.. 420hp and 400tq
|
12-31-2013, 11:25 AM | #381 |
|
Well I haven't swapped exhausts yet but soon. In the mean time I got a few things and installed some of them. I installed a aftermarket hurst shifter, BMR adj panhard bar, new clear corners, new belts and tensioner pulleys, SLP third brake light. Also I order a catch can after I found some junk behind my TB which is currently being powdercoated black . Oh and I have a speed bleeder and tick M/C chillen in my closet. Did I mention I may be picking up a set of 17x11 ZR1's I've been busy
__________________
2002 Camaro SS- BTR Stage 3, 799 Heads, Bolt on's Tuned by John at Broadview Automotive.. 420hp and 400tq
|
01-03-2014, 02:16 PM | #382 |
Nope! v6.
Drives: 2001 SOM v6 Join Date: Mar 2012
Location: Ottawa, OH
Posts: 459
|
Looks like you could use some upgraded sway bars too
__________________
3" Magnaflow cat-back, MSD 8.5mm Super Conductor Wires, NGK Iridium plugs, KN Air Filter, Halo Headlights, Shaved Air Lid, Chrome ZR1 Rims, SS Hood Scoop/Spoiler |
02-04-2014, 02:18 PM | #383 |
|
Alittle update, exhaust is on, needs to be tweaked, muffler is alittle crooked but I just need to go back to the exhaust shop and have it fixed. Catch can is on and working great.
I just ordered the brakemotive rotors and pads deal. Mine are warped its been driving me nuts. Once I get my tax return I will be ordering my monster clutch stage 2 kit and will get it installed ASAP so I can really bang gears!! And lastly im picking up a set of front bilstein shocks for $150 with 2k miles on them here shortly so I will officially be lowering my car. Now strano or BMR... hmmm
__________________
2002 Camaro SS- BTR Stage 3, 799 Heads, Bolt on's Tuned by John at Broadview Automotive.. 420hp and 400tq
|
02-05-2014, 10:24 AM | #384 |
and that it is!!
Drives: 2010 Camaro SS/ SLP ZL575 #70 Join Date: Oct 2009
Location: Bluemont, Virginia
Posts: 1,056
|
Hey how's it going. Looking good.......... you've been busy haven't you? I got the Hurst Short throw shifter at Carlisle GM National last year and had it installed there. Which catch can did you get? I just finally ordered the RX..... but, haven't gotten it yet.
__________________
|
02-05-2014, 06:49 PM | #385 |
|
Haha busy as always I love the hurst shifter in the 5th gens. MY dad and brother both have them and it's great. I got a Mike Norris catch can, popular with the 4th gen crowd. It's been working really well pulled a decen amount of junk out.
__________________
2002 Camaro SS- BTR Stage 3, 799 Heads, Bolt on's Tuned by John at Broadview Automotive.. 420hp and 400tq
|
02-20-2014, 04:42 PM | #386 |
|
Got some black 2 point subframe connectors ordered! Also i am picking up Some used SLP mats to use as a driver set. My other set it to mint to use haha. And looks like im gonna doing a gray manta vinyl.
__________________
2002 Camaro SS- BTR Stage 3, 799 Heads, Bolt on's Tuned by John at Broadview Automotive.. 420hp and 400tq
|
02-26-2014, 02:49 PM | #387 |
|
Picked up my used SLP mats for my Daily driving and im going to just keep my other ones in the closet because they are so nice. Did a front end alignment on it today and got it almost spot on definitely feels better now. And along with the alignment got my subframe connectors on, definitely a easy install and car feels so much tighter. Just turning i can tell a difference. High recommended. Also my manta stripe showed up today so i am going to have someone else put it on and see if i like it, if not pull it off.
__________________
2002 Camaro SS- BTR Stage 3, 799 Heads, Bolt on's Tuned by John at Broadview Automotive.. 420hp and 400tq
|
02-27-2014, 12:54 AM | #388 |
|
__________________
2001 Camaro V6
2016 Camaro 2SS |
02-27-2014, 10:09 AM | #389 |
|
Here are some pics of the subframes
And a pic from a local car meet. It's a quasar blue Lt1 6speed, my car, my bro (jaded'05) 2012 CRT SS, 1RareSS's moms 2010 black SS and a buddies black Z
__________________
2002 Camaro SS- BTR Stage 3, 799 Heads, Bolt on's Tuned by John at Broadview Automotive.. 420hp and 400tq
|
02-28-2014, 04:01 PM | #390 |
|
looks good. SFCs make your car stiffer? Mine was night and day difference.
__________________
2001 Camaro V6
2016 Camaro 2SS |
02-28-2014, 09:50 PM | #391 |
Drives: 1996 ss camaro #1762 Join Date: Feb 2012
Location: Beacon Falls Ct
Posts: 78
|
Sub frame connectors one of the best mods to do.
|
03-01-2014, 07:23 AM | #392 |
Nope! v6.
Drives: 2001 SOM v6 Join Date: Mar 2012
Location: Ottawa, OH
Posts: 459
|
Same here, that's the first suspension mod I would recommend to anyone
__________________
3" Magnaflow cat-back, MSD 8.5mm Super Conductor Wires, NGK Iridium plugs, KN Air Filter, Halo Headlights, Shaved Air Lid, Chrome ZR1 Rims, SS Hood Scoop/Spoiler |
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Winter's 2001 SS Build thread! | Bulldogwinters | 4th Generation Camaros | 776 | 06-05-2013 07:09 PM |
Blueclyde's 2011 2SS/RS LS3 Build Thread | Blueclyde | Member Car Journals | 18 | 05-04-2011 12:01 PM |
SneakyWorm's 2010 SS build thread | sneakyworm | Member Car Journals | 7 | 04-19-2011 02:44 PM |
SS vs Z. Why?? Not another Z28 Thread!! Just curious. | TRIXXTERR | General Automotive + Other Cars Discussion | 29 | 01-21-2011 09:27 AM |
Do you want the Z28? | ChrisB | Camaro ZL1 Forum - ZL1 Specific Topics | 1616 | 09-04-2010 11:49 PM |