rpepka's ADM Performance Blown L99 runs 11.96 1/4 Mile ET - Page 3 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

rpepka · 09-15-2009, 10:11 PM

Dyno set up for this Saturday morning.

*radz28* · 09-16-2009, 09:28 AM

Those aren't drag radials - those are Goodyear GSD3s...

Great numbers though, especially on stock tires! What size stall again? I'll tell you that when you run a big stall, and especially since you're blown, you're almost wasting time if you're looking for the best time out of the car. I tried to run on street tires with my stall, in my old car, and DRs would slash more than four tenths off my times. That's just me though. I couldn't got WOT 'til I was way past the 60'.

Get some good DRs and you're going to be even more happy, IMVHO. I suggest some Mickey Thomsons. I cut 1.6X 60's on 3.23 with some suspension and at a 3900 lb. race weight.

JMVHO

Speed74SS · 09-16-2009, 11:06 AM

Quote:

Originally Posted by radz282003

Those aren't drag radials - those are Goodyear GSD3s...

Great numbers though, especially on stock tires! What size stall again? I'll tell you that when you run a big stall, and especially since you're blown, you're almost wasting time if you're looking for the best time out of the car. I tried to run on street tires with my stall, in my old car, and DRs would slash more than four tenths off my times. That's just me though. I couldn't got WOT 'til I was way past the 60'.

Get some good DRs and you're going to be even more happy, IMVHO. I suggest some Mickey Thomsons. I cut 1.6X 60's on 3.23 with some suspension and at a 3900 lb. race weight.

JMVHO

It would be nice if there were some other choices for the DR other than the Nitto right now, in 20" anyways. I am sure they will start rolling out from other companies sometime.

*radz28* · 09-16-2009, 11:54 AM

I thought Goodyear made a 20"; I must be mistaken. I'll have a look

*radz28* · 09-16-2009, 11:57 AM

I thought I saw another one in a magazine, but like Speedy' said, there's only Nittos. I'll have to look some more...

rpepka · 09-17-2009, 06:54 AM

Quote:

Originally Posted by radz282003

Those aren't drag radials - those are Goodyear GSD3s...

Great numbers though, especially on stock tires! What size stall again? I'll tell you that when you run a big stall, and especially since you're blown, you're almost wasting time if you're looking for the best time out of the car. I tried to run on street tires with my stall, in my old car, and DRs would slash more than four tenths off my times. That's just me though. I couldn't got WOT 'til I was way past the 60'.

Get some good DRs and you're going to be even more happy, IMVHO. I suggest some Mickey Thomsons. I cut 1.6X 60's on 3.23 with some suspension and at a 3900 lb. race weight.

JMVHO

The Converter is a Yank. It is a special 2800 stall (very street friendly).

2010 SSRS · 09-17-2009, 07:01 AM

Hell yea, Chevy power baby!

09-15-2009, 10:11 PM	#29
rpepka Drives: 2013 ZL1 # 2195 Join Date: Jun 2009 Location: Bradenton, FL Posts: 965	Dyno set up for this Saturday morning. __________________ http://www.sarasotahomestore.com/

09-16-2009, 09:28 AM	#30
radz28 Petro-sexual Drives: Ultra-Grin Join Date: Oct 2006 Location: Crazy Coast Posts: 15,225 View My Garage	Those aren't drag radials - those are Goodyear GSD3s... Great numbers though, especially on stock tires! What size stall again? I'll tell you that when you run a big stall, and especially since you're blown, you're almost wasting time if you're looking for the best time out of the car. I tried to run on street tires with my stall, in my old car, and DRs would slash more than four tenths off my times. That's just me though. I couldn't got WOT 'til I was way past the 60'. Get some good DRs and you're going to be even more happy, IMVHO. I suggest some Mickey Thomsons. I cut 1.6X 60's on 3.23 with some suspension and at a 3900 lb. race weight. JMVHO __________________ '20 ZL1 Black "Fury" A10, PDR, Exposed CF Extractor Magnuson Magnum DI TVS2650R // RFBG // Soler 103 // TooHighPSI Port Injection // THPSI Billet Lid // FF // Katech Drop-In // PLM Heat Exchanger // ZLE Cradle bushings // BMR Chassis-Suspension Stuff // aFe Bars // Diode Dynamics LEDs // ACS Composites Guards // CF Dash // Aeroforce // tint // other stuffs

09-16-2009, 11:54 AM	#32
radz28 Petro-sexual Drives: Ultra-Grin Join Date: Oct 2006 Location: Crazy Coast Posts: 15,225 View My Garage	I thought Goodyear made a 20"; I must be mistaken. I'll have a look __________________ '20 ZL1 Black "Fury" A10, PDR, Exposed CF Extractor Magnuson Magnum DI TVS2650R // RFBG // Soler 103 // TooHighPSI Port Injection // THPSI Billet Lid // FF // Katech Drop-In // PLM Heat Exchanger // ZLE Cradle bushings // BMR Chassis-Suspension Stuff // aFe Bars // Diode Dynamics LEDs // ACS Composites Guards // CF Dash // Aeroforce // tint // other stuffs

09-16-2009, 11:57 AM	#33
radz28 Petro-sexual Drives: Ultra-Grin Join Date: Oct 2006 Location: Crazy Coast Posts: 15,225 View My Garage	I thought I saw another one in a magazine, but like Speedy' said, there's only Nittos. I'll have to look some more... __________________ '20 ZL1 Black "Fury" A10, PDR, Exposed CF Extractor Magnuson Magnum DI TVS2650R // RFBG // Soler 103 // TooHighPSI Port Injection // THPSI Billet Lid // FF // Katech Drop-In // PLM Heat Exchanger // ZLE Cradle bushings // BMR Chassis-Suspension Stuff // aFe Bars // Diode Dynamics LEDs // ACS Composites Guards // CF Dash // Aeroforce // tint // other stuffs

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Official 1/8 Mile (V8) 2010+ Camaro Fast List	Merc	Dragstrip and Launch Techniques Discussion	763	08-12-2022 04:51 PM
L99 1/8th mile runs	9c1ny	Dragstrip and Launch Techniques Discussion	4	09-02-2009 11:18 PM
L99 Base line 1/4 mile times	Matt TuneTime	Dragstrip and Launch Techniques Discussion	23	06-29-2009 10:08 AM
L99 engine specifications	Tran	Wiki	0	10-19-2008 11:40 AM

09-17-2009, 07:01 AM	#35
2010 SSRS Drives: 3 V8 Camaros Join Date: May 2009 Location: The Ocean State Posts: 111,187 View My Garage	Hell yea, Chevy power baby!