You are browsing camaro5 
 |
|
06-10-2014, 12:41 PM
|
#1 |
  |
WTB LS3 Engine Harness - maybe
I'm "almost" at my wits end with a stumbling issue I'm having and I'm almost ready to swap the damn engine harness to rule out wiring. Anyone have or know where I can get one for a decent price? Or a long term project I can borrow one from to test it? Gonna test with a new PCM from a friend's car ... will know soon if that works.
Sent from my SAMSUNG-SGH-I747 using Tapatalk
__________________
2010 2SS - CAI Intake, ADM Scoop, RotoFab Washer relo. LT Headers and off-road pipes, X-pipe, Muffler Deletes, ZL1 Spoiler, Technostalgia Tail-lights
'98 T/A (Sold) - Forged 6.0ltr, MS3, P&P'd Heads/Valves, 90MM FAST/TB, Headers, 3" Y-pipe, 4" Mufflex Catback. Koni Adjustables w/GC coilovers (550/175), Strano Sway Bars '94 Z28 (Sold) ... LS1 swap (basically same setup as the T/A), TH350/3500 stall ... swapped it all into the T/A -- >> Some of my Projects My Fquick Page |
|
|
|
06-10-2014, 12:49 PM
|
#2 |
       
Drives: 2009 ZR1 Join Date: May 2010
Location: KCMO
Posts: 3,205
|
When I needed one there were only a handful available in the US. Maureen@Rodgers found me one for a great price. Sometimes you seen them on ebay but people usually ask more for them than you can buy from GM though.
|
|
|
|
|
06-11-2014, 08:11 AM
|
#3 |
|
|
Thanks for the tip
Sent from my SAMSUNG-SGH-I747 using Tapatalk
__________________
2010 2SS - CAI Intake, ADM Scoop, RotoFab Washer relo. LT Headers and off-road pipes, X-pipe, Muffler Deletes, ZL1 Spoiler, Technostalgia Tail-lights
'98 T/A (Sold) - Forged 6.0ltr, MS3, P&P'd Heads/Valves, 90MM FAST/TB, Headers, 3" Y-pipe, 4" Mufflex Catback. Koni Adjustables w/GC coilovers (550/175), Strano Sway Bars '94 Z28 (Sold) ... LS1 swap (basically same setup as the T/A), TH350/3500 stall ... swapped it all into the T/A -- >> Some of my Projects My Fquick Page |
|
|
|
|
|
|
|
 |
|
|
