02-17-2019, 09:00 PM | #1 |
Drives: 2010 CGM Camaro SS Join Date: Dec 2016
Location: MA
Posts: 515
|
Intake setup
Hi Folks,
I am thinking of adding either a Z/28 or Vararam intake along with Vmax ported throttle body and an intake spacer. Do the spacers work? How would the combination of these fare on an otherwise stock untuned car? Would there be a cumulative effect of gains with the three? Thanks |
02-18-2019, 08:24 AM | #2 |
Drives: 2014 ZL1 Join Date: Jul 2016
Location: Baltimore MD
Posts: 345
|
I wouldn't do a spacer since what is it accomplishing on a Supercharged car. I did see a big difference in throttle response when I went with a ported LS2 TB for awhile from JRE, (putting up for sale if interested) I now have a 102MM Nick Williams.
Most use the Roto fab intake with solid results and good luck here. The combination Roto Fab and LS2 or Vmax is good un-tuned better once a part of a larger package. |
02-19-2019, 11:32 AM | #3 | |
Drives: 2013 VR ZL1, M6 Join Date: Nov 2017
Location: PA
Posts: 338
|
Quote:
__________________
#3257 | 485whp 526wtq | K&N 63-3079 | Gates K080660HD (Green Belt) | ACDelco UPF48R | ZL1 Addons Wicker Bill | Mild2Wild
|
|
02-19-2019, 01:32 PM | #4 |
Drives: 2010 CGM Camaro SS Join Date: Dec 2016
Location: MA
Posts: 515
|
Oops wrong forum. Should be in general SS not ZL1.
Specific. **Mods please move.. |
02-21-2019, 11:18 AM | #5 |
Drives: 2014 ZL1 Join Date: Jul 2016
Location: Baltimore MD
Posts: 345
|
From the Throttle body no noticeable sound change. From porting the blower and the 5inch yes but its not loud like a Hellcat or GT500, or at least not in the cabin.
DB |
|
|
|
|